Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: CVO 110 CAM  (Read 632 times)

0 Members and 1 Guest are viewing this topic.


  • A day with out riding is like a day with out Air.
  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 63
  • The day I brought it home.
« on: June 30, 2019, 06:16:47 PM »

I'm sure this has been ask a thousand time,  I haven't been keeping up for a while and did do a little searching.
But here it goes. I just turn over 40000 miles on my 2007 110 ultra. now ever one telling me the cams and lifter should go out soon.
I'm thinking of going ahead and changing cam and lifter. What cam should I go with. I ride around town and take trips across states too every now and then.
I have Rinehart true duel 3 inch pipes, stage 2 air box. and a power commander tuner. What has work good for every one that rides not just a bar hopper.

Thanks Allen
Keep it between the ditches and the shiny side up.


  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 529
  • Officer Scott Noller RIP, 01/04/1989 - 12/28/2017
    • TX

    • CVO1: 2014 Ultra Limited
    • CVO2: 2016 BMW R1200RT
    • CVO3: SOLD: 2012 CVO Street Glide FLHXSE3 Dark Slate/Black Diamond with Phantom Flame graphics : SOLD 2015 Triumph T214 Bonneville "Texas Cigar" Commemorative
    • Wichitagreg
Re: CVO 110 CAM
« Reply #1 on: June 30, 2019, 08:09:13 PM »

Probably should research that Power Commander and see what cams are compatible with it.  If it can't adjust for a different cam you will need a different tuner like a FP3, TTS or Power Vision just to name a few.
I had the Andrews 57H in my 2012 CVO 110 and if you put that cam in and get a TTS tuner I could send you my dyno tuned calibration file as a starting point for the Flight Recorder autune process.
formerly WichitaGreg
Lives in the TX Hill Country
AKA r0de_runr
Explore your VA Benefits:


  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 200
  • 2007 CVO Road King 113cu Stage 4 Baker F6R
Re: CVO 110 CAM
« Reply #2 on: July 01, 2019, 07:41:17 AM »

Its not the Cams that wear out, however I went with the Andrews 54`s good wide torque band and not heavy on your valve springs (actually I changed out the valve springs as well for something less stressed, you should be looking at the inner cam Bearings (Go to Torrintons or equivalent) they can collapse, as you stated the lifters (many good choices S&S/Fueling etc) and also many are upgrading the cam chain Hydraulic tensioners I went with the zippers.

But most of all you need to check the Crank "Run Out", and if above 4 thousands of an inch then check your oil pump!!

If you have 40k without any upgrades you have done well, Don`t wait.

Good Luck.


  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2268
    • FL

    • CVO1: 15 FLTRUSE
Re: CVO 110 CAM
« Reply #3 on: July 01, 2019, 12:45:52 PM »

The Power Commander should be alright if that is what you already have. You will just need a shop that does tuning and is familiar with using the Power Commander to retune the bike. Lots of Performance oriented bikes with PC's. I do think some of the more popular (now) tuners may be easier to use but the PC can do a admirable job. Just don't try to download a "Canned" tune and think all is well. Find you a shop.

Page created in 0.124 seconds with 26 queries.