Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 3 [All]

Author Topic: Working on the RGU.  (Read 2907 times)

0 Members and 1 Guest are viewing this topic.

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Working on the RGU.
« on: June 23, 2019, 08:51:26 PM »

SO I worked on the bike today and took the toe shift lever off and added heel-toe shifter levers. These are CHEAP Amazon levers so I ordered the Harley levers.

The PO had used a piece of tubing when he removed the heel shifter and had wrapped packing tape around the shifter shaft so it wouldn't rattle...……. :frown::serious::frown:   Did I mention how much I hate fixing stupid crap PO's do to a bike.

My nearest dealer didn't have the spacer in stock so I ordered it from Surdyke along with some other parts. But I wanted to be able to ride my bike until the parts get here so I went to the hardware store and bought a 3/8ID x 1/2" bushing that drilled out to 1/2" to fit the shifter shaft. It isn't perfect and the shaft still has a little play in it but I can ride the bike.



I had to try and bevel the spacer a little to go over the shaft where it goes from splined to smooth.





The new heel-toe shift levers I got from Amazon came with these pegs but the PO had installed floorboard spacers so I wanted to move the pegs out some.



This wasn't my idea I got it off a post on the RoadGlide forum.







Here is what it looks like with the heel & toe pegs spaced out 1/2".

Logged

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #1 on: June 23, 2019, 09:05:02 PM »

Here is a shot with my spacer I made.



And a closeup.



Next I took the chrome tank console off and installed a gloss black console.



It was dirty under the console so I cleaned it up before I installed the new one.



I kept the CVO fuel door because it has the CVO badge on it. And I also kept the CVO insert because it is metal and the one that came with the black console was plastic. Plus I think it just looks better. I am real happy with how this turned out. IHMO I think the black console looks better than the chrome one.





And the last thing I did was to pull the pin in the tree so I could roll the handlebars forward some since I didn't like how close they were.



« Last Edit: June 23, 2019, 09:20:48 PM by WildmanUltra »
Logged

GregKhougaz

  • It's a Two Wheeled World.
  • Global Moderator
  • 5k CVO Member
  • *****
  • Offline Offline
  • Posts: 9139
    • CA


    • CVO1: '15 Road Glide Ultra
    • CVO2: '18 Porsche C4 GTS
    • CVO3: '18 Porsche Macan S and my mountain bike.
Re: Working on the RGU.
« Reply #2 on: June 23, 2019, 10:05:38 PM »

Nothing like a little good old American ingenuity.   :2vrolijk_21:   :2vrolijk_21:
Logged


"We've got some tall tales we love to tell.  They may not be true but we sure do remember them well." 
 Sawyer Brown

When you come to a fork in the road... take it!

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #3 on: June 24, 2019, 02:25:40 AM »

Nothing like a little good old American ingenuity.   :2vrolijk_21:   :2vrolijk_21:

Having a drill press helps. It isn't perfect but it sure is a HECK of a lot better than the piece of tubing the PO had used. Trying to UNDO all the crappy work others have done is always fun.
Now that I have the heel-toe shifter installed I am finding I might want to use extended shift levers. Which doesn't make any sense since my foot fit on my old bike. But if I do need extended levers I'll get them from Soft Brake and just return the Harley levers.
Logged

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #4 on: July 02, 2019, 01:42:57 PM »

Well no pictures this time but from reading a bunch of the threads on here and after riding the bike in the sun I found that I couldn't see my stereo very well so I saw that a lot of people had suggested using the screen shield from NuShield so I ordered their complete kit for the Boom and speedo/tach. I installed them and can say I was impressed with the quality and ease of installation.

I also hadn't posted any pictures of my bars moved forward. I'll get a chance to really try them out tomorrow on a ride to a VA appointment. We'll see how much better they feel now and if I still don't like the position I'll have to look at getting new bars.





I also ordered a rear fender extension for the tri-bar light and it will be here on Friday.
Logged

Haird

  • Seek Ye First the Kingdom of God
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5634
  • JOY is Jesus Over You
    • TN


    • CVO1: SOLD...2015 FLTRUSE Abyss Blue/Crushed Sapphire...Beauregard
    • CVO2: Traded..."Ginger" was my 2012 FLHXSE3 Ruby Red/Typhoon Maroon
    • CVO3: NOT a CVO but current ride: 2018 Indian Chieftain Limited, Black pearl with graphics
Re: Working on the RGU.
« Reply #5 on: July 02, 2019, 01:58:09 PM »

The gloss black console does look better on the black tank...well done.
Logged
IBA # 8562
T.G.I.F.  Today, God Is First

"I know not the way God leads me but well do I know my guide" Martin Luther

"If you don't know where you are going, any road will take you there"  George Harrison

"No matter where you go, there you are"  Buckaroo Bonzai

War Eagle


WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #6 on: July 05, 2019, 10:40:40 PM »

Thanks Haird.


So I didn't like the chrome cover for the water pump so I ordered a new one off Amazon in Gloss Black.



Installed on the bike.

Logged

OBB

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4623
  • aka Ohiobellboy
    • OH


    • CVO1: 2011 Slate/Black SERGU** traded
    • CVO2: 2015 Double Blue SERGU
    • CVO3: 2012 SERG Blue
Re: Working on the RGU.
« Reply #7 on: July 06, 2019, 06:14:38 AM »

No grass growing under your feet when it comes to changing it up to suit you. Looking good.  :2vrolijk_21:
Logged
PHOTOBUCKET IS HOLDING MY PIX HOSTAGE!!!

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #8 on: July 06, 2019, 12:40:56 PM »

No grass growing under your feet when it comes to changing it up to suit you. Looking good.  :2vrolijk_21:

I'm trying to do the little things I can for right now. I have some other plans for it and will buy parts over the winter and then come next spring really get at it.
Logged

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #9 on: July 06, 2019, 06:02:49 PM »

So I changed the highway peg mounts to the HD short arm mounts. I also installed Kuryakyn Heavy Industry Switchblade pegs. I need the stirrups for my right leg & prosthetic to support the heal when I am cruising. Plus with the stirrup I can have my heal on the floorboard and my toe on the stirrup.





Also changed out the rear brake pad to match.





And just to make everything match I swapped out my shifter pegs also.


Logged

rayson56

  • 1K CVO Member
  • *
  • Online Online
  • Posts: 1420
    • WA


    • CVO1: 2018 FLTRXSE Black Earth & Vivid Black
    • CVO2: 2011 FLHXSE2 Black Diamond (Traded)
    • CVO3: 2007 FXDSE Red (Sold)
Re: Working on the RGU.
« Reply #10 on: July 06, 2019, 06:44:41 PM »

Very nice, now get out and ride that beauty before fire season hits! Hope I didn't jinx us.  :oops:
Logged
Life's a journey not a destination. Enjoy the journey!

2018 SERG
2011 SESG (Traded)
2007 Dyna Wide Glide CVO (Sold)
2010 Night Rod Special
2007 full custom road king
2006 big dog mastiff
2000 big dog pro 18
1999 big dog prosport
1991 fxrs full custom
1984 v65 magna

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #11 on: July 07, 2019, 02:15:54 PM »

Very nice, now get out and ride that beauty before fire season hits! Hope I didn't jinx us.  :oops:

I hope not, I want to breath this year if I can. But it has been an unusual early summer here in central WA anyhow. We have been having so much wind that it really hasn't been enjoyable to ride much. I'm not talking about a breeze I'm talking 15MPH and higher winds and most years once spring is over with the winds die down.

Next week I am heading to ID to take the bike to Soft Brake so he can make me a custom rear brake lever. 
Logged

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #12 on: July 13, 2019, 08:47:21 PM »

Got my new shift linkage in the mail today so I had to go out and install it on the bike. It was made by Chopper Custom Covers I found him on FB.

Logged

Joel

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 704
    • WA


    • CVO1: 2015 CVO LIMITED
Re: Working on the RGU.
« Reply #13 on: July 14, 2019, 09:52:05 AM »

Looks good.
How is the Soft brake system working for you?
Logged
Always keep 2 feet away from your shadow

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #14 on: July 14, 2019, 04:07:21 PM »

Looks good.
How is the Soft brake system working for you?

I'm loving it. I can now reach the rear brake and use it. With no ankle with the stock rear brake pedal I had issues reaching it. I would recommend Soft Brake to anyone as it gives you more room on your floorboard plus makes the rear brake easier to get to.
Logged

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #15 on: July 27, 2019, 12:39:32 AM »

I got another package from the Brown Santa today.

First was a tank protector to keep my paint looking good.



And then the manuals for the bike. Now I have paper & PDF versions of them.



So since I have been blacking out some parts I ordered a gloss black switch cover.









And while I had it apart I installed the aux switch assembly for the Suspension Technologies M.R.P. reverse I am going to be installing.
Logged

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #16 on: July 30, 2019, 04:22:52 AM »

Most of my posts over the past few days has been in the DriveTrain area about the install of my M.R.P. reverse which went well other than  a few hickups.

But the Brown Santa came again today with some socks and a tank bra. Nothing exciting but the boot socks will be nice and for me instead of 3 pairs of sock it's like getting 6.

I had scratched my tank somehow even with me trying to be as careful as I can getting on and off my bike with my prosthetic or the zipper I have on my jeans.

 

So I installed the new bra.

Logged

Phreakyz

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 698
  • www.CVOHARLEY.com
    • OH


    • CVO1: Current: 2019 CVO Road Glide Lightning Silver & Charred Steel With Black Hole
    • CVO2: Previous: 2016 CVO Street Glide Licorice/Cobalt
Re: Working on the RGU.
« Reply #17 on: July 30, 2019, 06:37:41 AM »

Most of my posts over the past few days has been in the DriveTrain area about the install of my M.R.P. reverse which went well other than  a few hickups.

But the Brown Santa came again today with some socks and a tank bra. Nothing exciting but the boot socks will be nice and for me instead of 3 pairs of sock it's like getting 6.

I had scratched my tank somehow even with me trying to be as careful as I can getting on and off my bike with my prosthetic or the zipper I have on my jeans.
So I installed the new bra.
Good Stuff!  In the picture that scratch looks like it is just in the clear coat.   You should be able to buff it away with some compound or at least make it much less noticeable for when the day comes that you take the bra off!

Where did you get the Carbon Fiber Fork Lock Cover?
Logged

fastfreddy

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1511
  • MY CVO
    • IA

    • CVO1: 2013 FLTRXSE traded
    • CVO2: 2016 FLTRUSE
Re: Working on the RGU.
« Reply #18 on: July 30, 2019, 06:06:25 PM »

Good Stuff!  In the picture that scratch looks like it is just in the clear coat.   You should be able to buff it away with some compound or at least make it much less noticeable for when the day comes that you take the bra off!

Where did you get the Carbon Fiber Fork Lock Cover?
that cover is the stock one
Logged
SERGU aka the RENTAL ... never home & always broke...Thnx FF

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #19 on: July 31, 2019, 02:04:02 AM »

Good Stuff!  In the picture that scratch looks like it is just in the clear coat.   You should be able to buff it away with some compound or at least make it much less noticeable for when the day comes that you take the bra off!

Where did you get the Carbon Fiber Fork Lock Cover?

I need to get some new rubbing compound as the can I have is like 10 years old.... :-\ :-\   But I will try rubbin it out. No wise cracks now either.

The ignition switch surround I got from Surdyke part# 25700870 if you're talking about the black one and if you mean the chrome one that was the stock cover like fastfreddy said.
I didn't think the chrome cover looked right with the black dash.
Logged

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #20 on: August 06, 2019, 06:56:14 PM »

So I am trying to get all the little stuff done to the bike before I leave Friday morning heading to Deadwood, SD for SW IX. I got the wiring finished for my Tri-Bar and rear fender extension done today.





Rechecked my belt tension & rear axle alignment. Then installed a cup holder on my handle bars. I'm not a fan of stuff on my bars but I want to stay hydrated on the ride.
https://smile.amazon.com/gp/product/B07FJNMWSG/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Going to take the basket to the store and find the largest bottle I can get that will fit.

Then installed a Guardian Angle Bell holder.





And then for a little BLING had to add some flags to the tour pack.



Next is check all my fluid levels and just give it a quick once over.

Logged

Joel

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 704
    • WA


    • CVO1: 2015 CVO LIMITED
Re: Working on the RGU.
« Reply #21 on: August 06, 2019, 11:49:00 PM »

So what route are you going?
Can you take some of this smoke from the fires with you. You realize you jinxed it with responce in a thread awhile back. 
The bike is looking good.
Logged
Always keep 2 feet away from your shadow

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #22 on: August 07, 2019, 12:57:59 AM »

So what route are you going?
Can you take some of this smoke from the fires with you. You realize you jinxed it with responce in a thread awhile back. 
The bike is looking good.

Going right past you on I-90, taking the slab all the way there then on the way home I'm riding back roads.
Logged

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #23 on: August 07, 2019, 03:41:02 AM »

Have to bring my spare socket with me for that JUST IN CASE something bad happened. It would SUCK to be 1,000 miles away from home with only one leg to stand on. So I figured I would have a little fun while I was doing it too. I have a Gadsden flag coming I am going to try and attach to the socket also.

Logged

Rooster

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5174
  • FLhtcuse2.ORG
Re: Working on the RGU.
« Reply #24 on: August 07, 2019, 10:21:27 AM »

BROWN SANTA :huepfenlol2: :huepfenlol2: :huepfenlol2:
Logged

fastfreddy

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1511
  • MY CVO
    • IA

    • CVO1: 2013 FLTRXSE traded
    • CVO2: 2016 FLTRUSE
Re: Working on the RGU.
« Reply #25 on: August 07, 2019, 07:06:46 PM »

Good looking flags  :2vrolijk_21:
Logged
SERGU aka the RENTAL ... never home & always broke...Thnx FF

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #26 on: August 09, 2019, 01:03:55 AM »

Loaded up and ready to roll in the morning. Stopping in Missoula, MT tomorrow night then Billings, MT the next night.



Logged

Joel

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 704
    • WA


    • CVO1: 2015 CVO LIMITED
Re: Working on the RGU.
« Reply #27 on: August 09, 2019, 09:45:32 AM »

Ride safe.
Cataldo has a forest fire going and heavy smoke on I-90
Logged
Always keep 2 feet away from your shadow

Rooster

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5174
  • FLhtcuse2.ORG
Re: Working on the RGU.
« Reply #28 on: August 13, 2019, 10:05:31 AM »

Attended the Abate spring opener for years when it was in Cataldo. Good times
Logged

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #29 on: August 22, 2019, 10:34:19 PM »

Well I got home from my trip to Deadwood, SD and found a little gift in my rear tire from the trip.

Logged

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #30 on: August 27, 2019, 06:10:00 PM »

Well I got my tire replaced for $54 with the Tire & Wheel coverage. But I couldn't put that dirt wheel back on the bike so I spent a little while washing it.

Logged

Joel

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 704
    • WA


    • CVO1: 2015 CVO LIMITED
Re: Working on the RGU.
« Reply #31 on: August 28, 2019, 09:20:05 AM »

On many miles on the tire you replaced?
Had a nail in the rear at about the 1000 mile range and was replaced under the wheel & tire warranty but they waived the deductible for me.
I have a little over 15,000 on it now and looking for a nail.
Logged
Always keep 2 feet away from your shadow

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #32 on: August 28, 2019, 07:08:19 PM »

On many miles on the tire you replaced?
Had a nail in the rear at about the 1000 mile range and was replaced under the wheel & tire warranty but they waived the deductible for me.
I have a little over 15,000 on it now and looking for a nail.

Just over 10k miles.
Logged

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #33 on: September 12, 2019, 11:13:05 PM »

While I was waiting for UPS to finally show up with my new reverse & shocks I installed the Custom Dynamics LED Vent Fillers. Boy do I really like how the newer fairing comes off compared to the older ones.





The old headlight surrounds are being removed and replaced.







Logged

WildmanUltra

  • Wildman
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 214
  • Scars only show where we've been, Live Life
    • WA


    • CVO1: 2015 CVO RGU Carbon Dust/Autumn Sunset
    • CVO2: 2011 Road Glide Ultra
    • CVO3: 2010 Road Glide Custom
Re: Working on the RGU.
« Reply #34 on: September 12, 2019, 11:14:02 PM »

I'd also got LED turn signal lights to both the front and rear of the bike.

https://youtu.be/Gchaaw4Pmk4

https://youtu.be/ucW9dwoK5Ic

Hazard lights on

https://youtu.be/SkawK2YM1UQ

Left turn signal

https://youtu.be/aEQUb0piegc

And while I had everything apart I also installed in the upper vent a screen from Vent Screens.



https://motorcycleventscreens.com/
Logged
Pages: 1 2 3 [All]
 

Page created in 0.221 seconds with 25 queries.