Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 2015 CVO RoadGlide Ultra shifter linkage mod  (Read 265 times)

0 Members and 1 Guest are viewing this topic.


  • Tennessee Squire
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 783
  • "I'm gonna see a man about a dog!"

    • CVO1: 2015 FLHRUSE
    • CVO2: 2004 FLHTCSE (Sold)
2015 CVO RoadGlide Ultra shifter linkage mod
« on: June 27, 2019, 12:08:53 PM »

Disregard, user error, custom acorn nut does have flats on it.
Must be age related!   ;D

Hello All,

I had replaced my toe/heel shifter arms and their spring with longer ones from softbrake a while ago and twice the opposite end shifter lever bolt had worked loose.

This time I made sure that the bolt was cleaned off and blue locktite applied.

Question, softbrake makes a shifter arm to match both toe/heel arm however, I am having issues removing the stock acorn nut on the linkage to arm connection.

Any suggestions, or is it normal to destroy the fastener since its not a normal sided fitting?

#4 in the diagram
« Last Edit: June 28, 2019, 09:29:47 AM by roadrunner »
Clearview GP 12", Fullsac DX, 2.25 power cores with screen and TTS Tune.

Page created in 0.114 seconds with 24 queries.