Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[JONNIEROCK]

  I've got a 16 CVO SG. When I hold down the trigger switch (description in manual) to engage to accessory mode, seems like I always end up resetting one of the trip meters, which I use for oil changes and mileage. Anyone have a trick for operating this switch without resetting one of the meters? I done it, but it's a nano second between doing it right and not.
             Thanks Jonnierock

[lorenc]

I always make sure Im on the total miles or the Remaining miles. Thats my work around that works but its not perfect. Depends if I remember to change to one of those before I turn off the bike.

[motor1]

I always make sure Im on the total miles or the Remaining miles. Thats my work around that works but its not perfect. Depends if I remember to change to one of those before I turn off the bike.

Same here, if you I am in odometer display or miles till empty I can avoid a trip reset.

[spence]

I would get caught in the dreaded reset when exiting aux mode, I found that while still in aux mode I cycle all the way through back to total mileage then exit it and all seems well since doing that.

[brianfl67]

When you're holding your button down wait for the gauge needles to jump then let go works for me

Sent from my SM-N975U using Tapatalk

[JONNIEROCK]

  Thanks for the help. Leaving on total mileage is the ticket. If it's on any trip mileage,  i always seem to hold it down a nano second to long, thus resetting it.