www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2] 3 4  All

Author Topic: Roger's bits and pieces  (Read 10416 times)

0 Members and 1 Guest are viewing this topic.

Midnight Rider

  • AKA: TCnBham
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11107
  • FLHRSEI.ORG

    • CVO1: 2011 SERGU Rio Red (sold)
Re: Roger's bits and pieces
« Reply #15 on: April 26, 2007, 11:32:07 AM »
Nice work, Roger!  You aren't going to know you're on the same bike when all that gets done.  I'm going to have to get me one of those BadAs covers, for sure...when I was putting mine back together, I HATED putting those two tacky azzed nuts back on there, but had nothing in hand to replace them with...that would be an easy 5 minute swap though.  You're going to love it...new paint, new suspension, new lights... :2vrolijk_21:

You've got to get the pulley cover and lower belt guard...

Then new chrome calipers because you'll want a good feeling brake system to go with the good feeling suspension... ;)
Logged
Sometimes it takes a whole tankful of fuel before you can think straight.
I had the right to remain silent, just not the ability...

Gone, but not forgotten...2011 FLTRUSE with
Fullsac X Pipe w/2" Baffles
Legend Air Ride Rear Shocks
Traxxion Dynamics AK-20 Front Suspension
Clearview GT13 Windshield
TTS Mastertune

HWYMAN1

  • Basic 103
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 906
  • FLHRSEI.ORG
Re: Roger's bits and pieces
« Reply #16 on: April 26, 2007, 12:52:57 PM »
Roger,
all your stuff looks great! I just ordered the bad ass for front fork ( taking to Traxxion May 11 for install). Did they have to touch up or repaint any of rear fender when they painted to match the "street glide" tail hugger? John
Logged
Rinehart TD
103 with zipper 575 GD cams
Bitubo rear shocks
Baker DD6 transmission
Traxxion dynamics front end
Stage 1 SE AC

icybay

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 498

    • CVO1: (2) 2004 SEEG B&B's ECoast & WCoast
    • CVO2: 2000 FLTRSEI B/O/W
Re: Roger's bits and pieces
« Reply #17 on: April 26, 2007, 01:11:46 PM »
Rog-  Heres how the detonator billet sprocket looks on my bike. And its all d00d's fault.

Logged

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32641
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: Roger's bits and pieces
« Reply #18 on: April 26, 2007, 01:14:42 PM »
Quote from: icybay on April 26, 2007, 01:11:46 PM
Rog-  Heres how the detonator billet sprocket looks on my bike. And its all d00d's fault.


Sweeet!! :2vrolijk_21: Always glad to help a brotha out. :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

Midnight Rider

  • AKA: TCnBham
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11107
  • FLHRSEI.ORG

    • CVO1: 2011 SERGU Rio Red (sold)
Re: Roger's bits and pieces
« Reply #19 on: April 26, 2007, 02:43:09 PM »
Yea, I'm going to take my rear filler strips out just so I can see all the chrome chit between the bags and fender... ;D  Got that idea from Brian this past weekend....
Logged
Sometimes it takes a whole tankful of fuel before you can think straight.
I had the right to remain silent, just not the ability...

Gone, but not forgotten...2011 FLTRUSE with
Fullsac X Pipe w/2" Baffles
Legend Air Ride Rear Shocks
Traxxion Dynamics AK-20 Front Suspension
Clearview GT13 Windshield
TTS Mastertune

RJ749

  • SEEG Cult Newbie
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 10539

    • CVO1: 2006 FLHTCUSE
    • CVO2: 2005 FLHTCSE
    • CVO3: 2002 FXDWG3
Re: Roger's bits and pieces
« Reply #20 on: April 26, 2007, 03:42:21 PM »
Quote from: otophile on April 26, 2007, 12:52:57 PM
Roger,
all your stuff looks great! I just ordered the bad ass for front fork ( taking to Traxxion May 11 for install). Did they have to touch up or repaint any of rear fender when they painted to match the "street glide" tail hugger? John

John, I bought the factory painted Black piece.  I figured it's so low and shaded no one would see any difference and that appears to be correct.  No painting on anything necessary.
« Last Edit: April 26, 2007, 03:47:41 PM by Rjob749 »
Logged

RJ749

  • SEEG Cult Newbie
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 10539

    • CVO1: 2006 FLHTCUSE
    • CVO2: 2005 FLHTCSE
    • CVO3: 2002 FXDWG3
Re: Roger's bits and pieces
« Reply #21 on: April 26, 2007, 03:49:00 PM »
Quote from: icybay on April 26, 2007, 01:11:46 PM
Rog-  Heres how the detonator billet sprocket looks on my bike. And its all d00d's fault.


Looks great.  You do know he's the thorn in a lot of our .......sides ::)
Logged

Hoist!

  • Monster
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 21634
  • This chit ain't ROCKET SCIENCE!!!!

    • CVO1: '07C FLHRSE3, BLACK ICE OF COURSE, CUSTOM 110" TC 6-SPEED +++, "CYBIL"!!!
    • CVO2: '99 FXR3 BRIGHT & DARK CANDY BLUE W/FLAMES, STAGE II 80" EVO 5-SPEED +++, "JOY"!!!
    • CVO3: 4: & 5: '85 FXWG BLACK w/CUSTOM FLAMES, 110" EVO 6-SPEED +++ CVO style!!!; '08 NSMC PROSG CUSTOM FXR BASED PRO STREET BLACK, 89" EVO 5-SPEED, VERY FAST!!!; '09 NSMC HSTBBR CUSTOM RIGID HOISTBOBBER, SILVER METALFLAKE BATES SOLO SEAT & TIN w/BLACK WISHBONE FRAME, 80" EVO (w/Shovelhead bottom end) 4-SPEED! VERY COOL!!!
Re: Roger's bits and pieces
« Reply #22 on: April 26, 2007, 03:50:44 PM »
Quote from: Rjob749 on April 26, 2007, 03:49:00 PM
Looks great.  You do know he's the thorn in a lot of our .......sides ::)

You gotta give him credit. He's relentless when it comes to spending OPM! He does find some cool chit in the process. Damn, he's even got me buying chrome now! ;) Hoist! 8)
Logged
"We wanna be free to ride our machines without being hassled by The Man!"

Traxxion Dynamics Suspension Rules! "It ain't braggin' if you can back it up!"

"Cause I'm sitting on top of the world!" (zoom in on satellite map in my Profile)

RJ749

  • SEEG Cult Newbie
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 10539

    • CVO1: 2006 FLHTCUSE
    • CVO2: 2005 FLHTCSE
    • CVO3: 2002 FXDWG3
Re: Roger's bits and pieces
« Reply #23 on: April 26, 2007, 04:06:02 PM »
Quote from: Hoist on April 26, 2007, 03:50:44 PM
You gotta give him credit. He's relentless when it comes to spending OPM! He does find some cool chit in the process. Damn, he's even got me buying chrome now! ;) Hoist! 8)

I threw the lower belt cover on it today too.  They didn't have the sprocket cover on hand so I didn't worry about it (for now).

If I get it all at once there won't be anything left for later anyway.  (no another new bike to start over is not an option)
« Last Edit: April 26, 2007, 05:06:20 PM by Rjob749 »
Logged

HWYMAN1

  • Basic 103
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 906
  • FLHRSEI.ORG
Re: Roger's bits and pieces
« Reply #24 on: April 26, 2007, 04:29:15 PM »
Quote from: Rjob749 on April 26, 2007, 03:42:21 PM
John, I bought the factory painted Black piece.  I figured it's so low and shaded no one would see any difference and that appears to be correct.  No painting on anything necessary.
that's great, mine just got here, have not even pulled it out of the box! I guess I will have to try it out ( still can't make my mind on this or the RWD fender/filler extension for rear of bike to go with extended saddlebags :nixweiss:) JOhn
Logged
Rinehart TD
103 with zipper 575 GD cams
Bitubo rear shocks
Baker DD6 transmission
Traxxion dynamics front end
Stage 1 SE AC

110tHunDer

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14319
Re: Roger's bits and pieces
« Reply #25 on: April 26, 2007, 07:22:39 PM »
Quote from: TCnBham on April 26, 2007, 02:43:09 PM
Yea, I'm going to take my rear filler strips out just so I can see all the chrome chit between the bags and fender... ;D  Got that idea from Brian this past weekend....

Yeah, and it didn't even cost ya anything! :huepfenlol2:  Also, you're not removing chrome, so 'D00d can't give you chit about it, either! :2vrolijk_21:

Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50549
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: Roger's bits and pieces
« Reply #26 on: April 26, 2007, 07:25:21 PM »
If you remove the filler strips at least put on those little chrome covers that hide the rear facing ugly bolt heads at the rear of the saddlebag support bracket.
Logged

110tHunDer

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14319
Re: Roger's bits and pieces
« Reply #27 on: April 26, 2007, 07:32:48 PM »
Quote from: Twolanerider on April 26, 2007, 07:25:21 PM
If you remove the filler strips at least put on those little chrome covers that hide the rear facing ugly bolt heads at the rear of the saddlebag support bracket.

Yeah, baby!  We talked about those suckers, too!  Terry, here's the part:

Billet Saddlebag Mount Bracket Trim

Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50549
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: Roger's bits and pieces
« Reply #28 on: April 26, 2007, 07:45:00 PM »
Quote from: 103tHunDer on April 26, 2007, 07:32:48 PM
Yeah, baby!  We talked about those suckers, too!  Terry, here's the part:




Had those on the last Road King.  Nice simple clean and effective.  I can't remember where right now.  But in the last week or so I saw a vendor offering similar products.  Same intent but with a few different looks.  If I think of where will post the alternatives here.
Logged

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32641
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: Roger's bits and pieces
« Reply #29 on: April 26, 2007, 07:46:02 PM »
Quote from: 103tHunDer on April 26, 2007, 07:22:39 PM
Yeah, and it didn't even cost ya anything! :huepfenlol2:  Also, you're not removing chrome, so 'D00d can't give you chit about it, either! :2vrolijk_21:


Quote from: 103tHunDer on April 26, 2007, 07:32:48 PM
Yeah, baby!  We talked about those suckers, too!  Terry, here's the part:

Billet Saddlebag Mount Bracket Trim


How could I get mad at someone that is going to show more chrome and add chrome in the process. :2vrolijk_21: :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d 
 :fireman:
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0
Pages: 1 [2] 3 4  All
« previous next »
 

Page created in 0.186 seconds with 24 queries.