Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[GasRat]

The J&S stand works with no problem. It fits the same, right inside the dogbone. I'm not sure if you can tell by the picture but the center stand does scrape a little in the turns, But no more than the floor boards.

[GasRat]

One more picture.

[porthole]

How much does the center stand use "space-wise" of the dog bone, height?
You have a non lowered bike, one of the reasons I bought the J&S was that it fit under the lowered SEEG's, but just barely.

Your bottle jack is different then mine, is it still  a chinese jack?, Notice any leaks?

Did yours come with the thumbscrews?

[GasRat]

Space wise I would have to guess about 1/8" to 1/4" height.  I do notice that when I put the jack under the bike it rubs on the left side of the frame as it goes through.  So it does take some clearance away.

I did have a leaker on the jack and this is the one they replaced it with.  I'll have to look, but I would bet it is not a "Made in USA" product.

No, I bought the thumbscrews after someone here said where to get them.  Great addition, I don't know why they don't just put them on to begin with.

[SneakyPete]

Words of caution before you buy the HD center stand....If you have 2:1 exhaust the left side "foot" will contact the pipes.  Installed and had to remove from my bike for that reason.  Am going with another brand.

[SBB]

Words of caution before you buy the HD center stand....If you have 2:1 exhaust the left side "foot" will contact the pipes.  Installed and had to remove from my bike for that reason.  Am going with another brand.

Pete

Works with a 2 into 1 ProPipe.
Was very close so I trimmed a "fuzz" off the foot to be safe.
From what I can tell the Harley centerstand is the only one with the struts up to the frame.
Mine works great! (all three of them, damnit)
Can you say, another thousand dollars gone!

 

[Twolanerider]

Pete

Works with a 2 into 1 ProPipe.
Was very close so I trimmed a "fuzz" off the foot to be safe.
From what I can tell the Harley centerstand is the only one with the struts up to the frame.
Mine works great! (all three of them, damnit)
Can you say, another thousand dollars gone!

 

How the hell do you mount three center stands on one bike ?

[hd-dude]

How the hell do you mount three center stands on one bike ?

 

[07 CVO]

How the hell do you mount three center stands on one bike ?

Turn it up-side down do you get a better look angle...lol

Mark

[SBB]

How the hell do you mount three center stands on one bike ?

Easy Don

You get three dressers together and there goes the budget.
One bike can't have something without the others complaining.

Just glad they don't make a centerstand for a Lowrider and a Frontier. (Whoever the hell "they" is)

[SBB]

Another angle.

[Twolanerider]

Easy Don

You get three dressers together and there goes the budget.
One bike can't have something without the others complaining.

Just glad they don't make a centerstand for a Lowrider and a Frontier. (Whoever the hell "they" is)

No kidding.  It took a long time for the red bike to get over the other red bike getting brought home.  She was bitchy before she shelled her transmission.  No center stands for one without the other; that's for sure.

[16HD117]

Easy Don

You get three dressers together and there goes the budget.
One bike can't have something without the others complaining.

Just glad they don't make a centerstand for a Lowrider and a Frontier. (Whoever the hell "they" is)

Hey Chip, How do you get up on those things with those little short legs of yours?
 

[HogBreath]

Hey Chip, How do you get up on those things with those little short legs of yours?
 

OK.THAT made me crack up... THAt right there is funny

[SBB]

Hey Chip, How do you get up on those things with those little short legs of yours?
 

Plan to carry a set of 110 cylinders from Ken's bike to use as a step.
Why?
You getting a centerstand?
I'll ask Ken if it's ok for you to borrow his cylinders?
He's very agreeable, most of the time!
Remember, it's not the length of the leg that matters, it's the quality of the inseam!

S
  /
    B
      /
        B