Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Hoist!]

Does anyone know if HD P/N 94773-00A wiil work with a SERK3? These are not listed for my bike, or any FL. But there are no chrome bolts shown for an FL. Will these, or another P/N work on our bikes, even though they're not listed for our bikes? Hoist!

[spydglide]

Does anyone know if HD P/N 94773-00A wiil work with a SERK3? These are not listed for my bike, or any FL. But there are no chrome bolts shown for an FL. Will these, or another P/N work on our bikes, even though they're not listed for our bikes? Hoist!

Hey Hoist, you're gonna have to talk to D00d about the 'stealth-chrome' up under the saddlebags.....that's probably why they don't list any for the dresser......not too many crazy enough to by shiny for the hidden recesses.  har!  spyder

[Fired00d]

Hey Hoist, you're gonna have to talk to D00d about the 'stealth-chrome' up under the saddlebags.....that's probably why they don't list any for the dresser......not too many crazy enough to by shiny for the hidden recesses.  har!  spyder

  I shared w/him the P/N I had for mine (94773-00A) and I believe he said they wouldn't work for his.

 
Ride Safe,
Fired00d
 

[Hoist!]

Hey Hoist, you're gonna have to talk to D00d about the 'stealth-chrome' up under the saddlebags.....that's probably why they don't list any for the dresser......not too many crazy enough to by shiny for the hidden recesses.  har!  spyder

Thanks spyd. I already have the pully cover on, since they don't make the matching Billet Roadwinder pulley for our bikes. But it needs the chrome bolts too. The zinc ones don't quite cut it. I already have the Roadwinder Floating Rotor on (with chrome hardware), and the Chrome PM Calipers arrive next week. I don't understand why, if we want to spend money on chit behind the bags, why thet don't make the matching parts for us! Typical MoCo thinking!

Hoist!

[Hoist!]

I shared w/him the P/N I had for mine (94773-00A) and I believe he said they wouldn't work for his.

 
Ride Safe,
Fired00d
 

I bought the ones you said d00d. I'm trying to confirm if anyone used them on the SERK3 yet, before I pull the old ones out when I get my bike back. Otherwise, I'll be the Guinea Pig on this!

Hoist!

[Fired00d]

I just checked that P/N (94773-00A) on the MoCo website and they don't even say they will fit my bike. It may be one of those cases where they will work, but the MoCo doesn't realize it. Such is the case w/the SS Braided fuel line most of us have switched to that is for Dyna model use only.

I would try to compare the two bolts/washers together and see if they are the same size/length. They just may work.

 
Ride Safe,
Fired00d
 

[Midnight Rider]

Thanks spyd. I already have the pully cover on, since they don't make the matching Billet Roadwinder pulley for our bikes. But it needs the chrome bolts too. The zinc ones don't quite cut it. I already have the Roadwinder Floating Rotor on (with chrome hardware), and the Chrome PM Calipers arrive next week. I don't understand why, if we want to spend money on chit behind the bags, why thet don't make the matching parts for us! Typical MoCo thinking!

Hoist!

Hoist...I had to use them on my rear pulley, as the only error HogPro made (because the pulley came seperately from the wheels...was backordered from PM) was not sending me the chrome bolts for the pulley.  I don't have the part number, but just pulled one off the old and took it down to match it up.  Came as a set of 5, if I'm not mistaken.  Don't forget the Blue Loctite!  I think they were around 12 bucks or so...

[Midnight Rider]

PS...I think the package said they were for a Dyna or some such chit...anyway, they worked perfectly.

[Fired00d]

PS...I think the package said they were for a Dyna or some such chit...anyway, they worked perfectly.

That would be the same set that I used - Chrome Hardware Kit for Rear Belt Sprocket - Hex Head

 
Ride Safe,
Fired00d
 

[Hoist!]

Hoist...I had to use them on my rear pulley, as the only error HogPro made (because the pulley came seperately from the wheels...was backordered from PM) was not sending me the chrome bolts for the pulley.  I don't have the part number, but just pulled one off the old and took it down to match it up.  Came as a set of 5, if I'm not mistaken.  Don't forget the Blue Loctite!  I think they were around 12 bucks or so...

Thanks Terry! The package says it fits '00-'06 Softail and '00-'05 Dynas. I was going to compare them to one, when I remove one, after I get the bike back. I thought I'd try to confirm it while I was waiting. The original P/N for the bolt for my SERK is 3109. Can anyone confirm the SEUC's bolt P/N?

Hoist!

[Boatman]

not too many crazy enough to by shiny for the hidden recesses.  har!  spyder

I can't keep up with you guys!    

[Hoist!]

That would be the same set that I used - Chrome Hardware Kit for Rear Belt Sprocket - Hex Head

 
Ride Safe,
Fired00d
 

That's a different P/N than I have. I was told that the '07 P/N wouldn't work by Zanotti's. That's why I tied the earlier P/N, with the 00A suffix.

Hoist!

[Fired00d]

Thanks Terry! The package says it fits '00-'06 Softail and '00-'05 Dynas. I was going to compare them to one, when I remove one, after I get the bike back. I thought I'd try to confirm it while I was waiting. The original P/N for the bolt for my SERK is 3109. Can anyone confirm the SEUC's bolt P/N?

Hoist!

For a SEEG P/N is 3737A for bolt, and 6516HW for washer.

 
Ride Safe,
Fired00d
 

[spydglide]

I much prefer the polished stainless fasteners 'cause the chromed ones always end up rusting in the places where I 'nick' 'em while tightening 'um down....and then I've got to look at that rust spot on, and on, and on. Or, get down there w/ a Q-tip with polish and deal w/ it over, and over, and over.   Polished Stainless is for me.  har!   spyder

[Fired00d]

That's a different P/N than I have. I was told that the '07 P/N wouldn't work by Zanotti's. That's why I tied the earlier P/N, with the 00A suffix.

Hoist!

It's actually 3 different part numbers on that page for the same part.

94773-07

IN-STORE PURCHASE ONLY Contact dealer for pricing and availability.

Fits '07-later Dyna® and Softail® models.

MSRP US $29.95


 
94773-00A

Fits '00-'06 Softail® and '00-'05 Dyna® models.

MSRP US $29.95



 
94708-98

Fits '93-'99 Softail®, '93-'99 Dyna®, '91-later Sportster® rear belt sprockets.

MSRP US $29.95

 
Ride Safe,
Fired00d