Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[RobertinArgyle]

My bike has 25k miles.  Instead of replacing cam chain tensioners at this point I am thinking of going with gear drive.  I think I will leave the heads and pistons alone.  What is the wisdom of this group for cam recommendations.  I have done a lot of research and several cams have been mentioned often-  Red Shift 557 and 575, Andrews 26 and 37,  HQ 0039,  Freedom Cycle YB12S.  I use the bike mainly for one up touring.  All input greatly appreciated!

[hd-dude]

The freedom yb12 or the S&S 510G are perfect for a 95" bagger. Specs are almost identical between the two.

[RobertinArgyle]

Just read a couple of very favorable posts on another board for the Woods TW6...

[nidan]

The Andrews 37 is a real fave, I ran the hi-comp version in my 95 and loved the broad torque curve, as long as your comp is 9.8 or less it's a winner, if higher the TW31G ( which I ran and got 98/101 with SE II slipons and even more with V&H Propipe)

You may also consider the new R&R 525 , a little higher lift than the TW37/S&S 510/TW37/31  a

[dsmbagger]

I like the Woods TW6. Will be good with your setup now and will still work if you do more to the motor down the road.....