www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2 3 4  All

Author Topic: My motor is done, Now it's a 113!!  (Read 8198 times)

0 Members and 1 Guest are viewing this topic.

SirMichael

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 349
  • Non Riding for the moment!!
My motor is done, Now it's a 113!!
« on: October 07, 2007, 11:54:25 AM »
 I had the 103 put in thursday!! It runs pretty good, still needs to be tuned!! I was going to have it tuned on friday, but the dealer couldn't get me in!! So I have just been riding alittle this weekend and will have it done on tuesday!!
  This motor makes alittle more noise than the other 103 that I did, the tapping sound!! I was told it would because of the bigger cam and heavier springs!! :confused5:

 This is what I ended up doing-  (07-Ultra)

  -SE103 big bore kit w/ flat top forged stroker pistons
  -Heads ported & polished & shaved and bigger valves (10.25:1 comp)
  -50mm throttle body matched to heads
  -251 cams w/adj. pushrods
  -Highflow A/C
  -SERT
  -D&D fatcat 2-1 exhaust w/ performance quiet baffle
  -SE performance clutch kit w/ spring


   Still needs to be tuned, but est. #'s  104-hp  108-tq  :2vrolijk_21:
    will know tuesday, I will post the results!! ;D


                                 Later
                                        MIKE :coolblue:


  (Changed it to a 113!!)


 

 

 
« Last Edit: November 09, 2007, 10:04:43 PM by SirMichael113 »
Logged

SirMichael

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 349
  • Non Riding for the moment!!
Re: My motor is done!!
« Reply #1 on: October 09, 2007, 09:48:41 PM »
 The bike was tuned today, 105-hp  &  107.5-tq, not to bad!!

 It runs pretty good, the D&D 2-1 exhaust is a great pipe, it's just alittle loud for me, but it runs good!! :2vrolijk_21: Some guys might like it, but its just a tick loud for me!!
 
It will take some getting use to, but I guess it's not to bad!! :nixweiss:
 

 

                                                     Later
                                                             MIKE :coolblue:
 
 

 
« Last Edit: October 18, 2007, 01:27:16 PM by SirMichael103 »
Logged

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6710

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: My motor is done!!
« Reply #2 on: October 09, 2007, 10:59:12 PM »
Mike,

Glad it is turned out the way you wanted it.  Looking forward to the Tommy spanking report ~~  errr I mean the ride report once you get some more miles on it now that it has been tuned.   What exhaust are you leaning towards now since these are too loud?
« Last Edit: October 09, 2007, 11:01:53 PM by Unbalanced »
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

FrankD

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 141
  • FLHRSEI.ORG
Re: My motor is done!!
« Reply #3 on: October 10, 2007, 12:44:33 AM »
Mike,
What will your choice be for an exhaust system? Do you plan on staying with a 2-1 setup or will you go with some sort of dual system?

FrankD
Logged
Of every one-hundred men, ten shouldn't even be there. Eighty are nothing but targets. Nine are real fighters...We are lucky to have them, they make the battle. Ah, but one, one of them is a Warrior... He will bring the others home.

Hericletus 500BC

Hoist!

  • Monster
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 21634
  • This chit ain't ROCKET SCIENCE!!!!

    • CVO1: '07C FLHRSE3, BLACK ICE OF COURSE, CUSTOM 110" TC 6-SPEED +++, "CYBIL"!!!
    • CVO2: '99 FXR3 BRIGHT & DARK CANDY BLUE W/FLAMES, STAGE II 80" EVO 5-SPEED +++, "JOY"!!!
    • CVO3: 4: & 5: '85 FXWG BLACK w/CUSTOM FLAMES, 110" EVO 6-SPEED +++ CVO style!!!; '08 NSMC PROSG CUSTOM FXR BASED PRO STREET BLACK, 89" EVO 5-SPEED, VERY FAST!!!; '09 NSMC HSTBBR CUSTOM RIGID HOISTBOBBER, SILVER METALFLAKE BATES SOLO SEAT & TIN w/BLACK WISHBONE FRAME, 80" EVO (w/Shovelhead bottom end) 4-SPEED! VERY COOL!!!
Re: My motor is done!!
« Reply #4 on: October 10, 2007, 09:17:30 AM »
Quote from: SirMichael103 on October 09, 2007, 09:48:41 PM
The bike was tuned today, 105-hp  &  107.5-tq, not to bad!!

 It runs pretty good, the D&D 2-1 exhaust is a great pipe, it's just alittle loud for me, but it runs good!! :2vrolijk_21:

 Some guys might like it, but its just a tick loud for me!! I am going to take it off and sell it.
 I know I might lose alittle bit on the hp & tq  numbers, but thats ok!! :nixweiss:

 The D&D 2-1 fatcat w/ performance quiet baffle & the ghost pipe for 07 touring bikes is up for sale now!!
 go to sales for the details!!

                                                     Later
                                                             MIKE :coolblue:
 
 

 

Mike, before you give up on it conpletely, with your build, try just changing the muffler. Try using the FatCat Quiet Muffler instead of the Quiet Performance Muffler. I think you'll be happy with that setup on your build. ;)
Logged
"We wanna be free to ride our machines without being hassled by The Man!"

Traxxion Dynamics Suspension Rules! "It ain't braggin' if you can back it up!"

"Cause I'm sitting on top of the world!" (zoom in on satellite map in my Profile)

SirMichael

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 349
  • Non Riding for the moment!!
Re: My motor is done!!
« Reply #5 on: October 10, 2007, 10:05:29 PM »
 D&D says that you lose alot of the performance out of the 2-1 when you go to the standard baffle, so that kind of defeats the 2-1 purpose, plus it costs $330 to buy another muffler!!
I can't just change the baffle, I have to change the whole muffler tip!!

 I have a set of the Cobra 4" mufflers already, I might just buy the V&H Dresser Duals and use these Cobra mufflers, that should sound good, I hope!! :nixweiss:
The Cobras are not to loud and they have a good deep sound to them!!

   Thats probably the plan for now anyways!! :nixweiss:

                                                                    SirMichael103 :coolblue:
                                                               AKA- Undecided103 :confused5:
 
« Last Edit: October 10, 2007, 10:07:51 PM by SirMichael103 »
Logged

Hoist!

  • Monster
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 21634
  • This chit ain't ROCKET SCIENCE!!!!

    • CVO1: '07C FLHRSE3, BLACK ICE OF COURSE, CUSTOM 110" TC 6-SPEED +++, "CYBIL"!!!
    • CVO2: '99 FXR3 BRIGHT & DARK CANDY BLUE W/FLAMES, STAGE II 80" EVO 5-SPEED +++, "JOY"!!!
    • CVO3: 4: & 5: '85 FXWG BLACK w/CUSTOM FLAMES, 110" EVO 6-SPEED +++ CVO style!!!; '08 NSMC PROSG CUSTOM FXR BASED PRO STREET BLACK, 89" EVO 5-SPEED, VERY FAST!!!; '09 NSMC HSTBBR CUSTOM RIGID HOISTBOBBER, SILVER METALFLAKE BATES SOLO SEAT & TIN w/BLACK WISHBONE FRAME, 80" EVO (w/Shovelhead bottom end) 4-SPEED! VERY COOL!!!
Re: My motor is done!!
« Reply #6 on: October 10, 2007, 10:09:59 PM »
Quote from: SirMichael103 on October 10, 2007, 10:05:29 PM
D&D says that you lose alot of the performance out of the 2-1 when you go to the standard baffle, so that kind of defeats the 2-1 purpose, plus it costs $330 to buy another muffler!!
I can't just change the baffle, I have to change the whole muffler tip!!

 I have a set of the Cobra 4" mufflers already, I might just buy the V&H Dresser Duals and use these Cobra mufflers, that should sound good, I hope!! :nixweiss:
The Cobras are not to loud and they have a good deep sound to them!!

   Thats probably the plan for now anyways!! :nixweiss:

                                                                              MIKE :coolblue:
 

I have a set of V&H Dresser Duals if you want to go the used route. Let me know. But Joe said he gets excellent performance results with the D&D Quiet Muffler. Do you know anyone who has one to try out before you buy it? That would be worth doing before you dump the whole system. The muffler's all you need to try it out. Exhaust choices are tough. Good luck finding the right one for you. Let me know if you're interested in the V&H Headpipes. ;)

Hoist! 8)
Logged
"We wanna be free to ride our machines without being hassled by The Man!"

Traxxion Dynamics Suspension Rules! "It ain't braggin' if you can back it up!"

"Cause I'm sitting on top of the world!" (zoom in on satellite map in my Profile)

SirMichael

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 349
  • Non Riding for the moment!!
Re: My motor is done!!
« Reply #7 on: October 10, 2007, 10:17:39 PM »
Quote from: Hoist on October 10, 2007, 10:09:59 PM
                                     Exhaust choices are tough. Good Luck

Hoist! 8)
I am not for sure yet, but I am just not a lover of the 2-1 systems, especially on the baggers!! I know alot of guys like them and the sound, but I don't think it's for me!! :wacky:

                                                            Undecided103 :confused5:
Logged

SirMichael

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 349
  • Non Riding for the moment!!
Re: My motor is done!!
« Reply #8 on: October 12, 2007, 09:36:01 PM »
 I decided to leave the D&D's on there for awhile, they are still a bit loud for my taste, but we'll see if they grow on me after awhile!! :nixweiss:  :nixweiss:

                                                                                 MIKE :coolblue:
Logged

Hoist!

  • Monster
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 21634
  • This chit ain't ROCKET SCIENCE!!!!

    • CVO1: '07C FLHRSE3, BLACK ICE OF COURSE, CUSTOM 110" TC 6-SPEED +++, "CYBIL"!!!
    • CVO2: '99 FXR3 BRIGHT & DARK CANDY BLUE W/FLAMES, STAGE II 80" EVO 5-SPEED +++, "JOY"!!!
    • CVO3: 4: & 5: '85 FXWG BLACK w/CUSTOM FLAMES, 110" EVO 6-SPEED +++ CVO style!!!; '08 NSMC PROSG CUSTOM FXR BASED PRO STREET BLACK, 89" EVO 5-SPEED, VERY FAST!!!; '09 NSMC HSTBBR CUSTOM RIGID HOISTBOBBER, SILVER METALFLAKE BATES SOLO SEAT & TIN w/BLACK WISHBONE FRAME, 80" EVO (w/Shovelhead bottom end) 4-SPEED! VERY COOL!!!
Re: My motor is done!!
« Reply #9 on: October 12, 2007, 09:41:26 PM »
Quote from: SirMichael103 on October 12, 2007, 09:36:01 PM
I decided to leave the D&D's on there for awhile, they are still a bit loud for my taste, but we'll see if they grow on me after awhile!! :nixweiss:  :nixweiss:

                                                                                 MIKE :coolblue:

Hey Mike, I said the same thing when I first put them on. And I had been using SPO's, which were pretty quiet. Didn't really want loud mufflers on my touring bike. But I got used to them, and now I love them. You hear everything your motor's doing with them. And cages seem to get intimidated and move out of your way! Now I like 'em! And I set off all the car alarms too! ;D

Hoist! 8)
Logged
"We wanna be free to ride our machines without being hassled by The Man!"

Traxxion Dynamics Suspension Rules! "It ain't braggin' if you can back it up!"

"Cause I'm sitting on top of the world!" (zoom in on satellite map in my Profile)

SirMichael

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 349
  • Non Riding for the moment!!
Re: My motor is done!!
« Reply #10 on: October 12, 2007, 10:19:23 PM »
Quote from: Hoist on October 12, 2007, 09:41:26 PM
Hey Mike, I said the same thing when I first put them on. And I had been using SPO's, which were pretty quiet. Didn't really want loud mufflers on my touring bike. But I got used to them, and now I love them. You hear everything your motor's doing with them. And cages seem to get intimidated and move out of your way! Now I like 'em! And I set off all the car alarms too! ;D

Hoist! 8)
WHAT, WHAT, I can't hear you!! :o
 Yah, they are growing on me, I agree you can hear everything that is going on with the motor, even though you can't hear anything else, but thats OK!! :2vrolijk_21:  :2vrolijk_21:

                                                   MIKE :coolblue:
                                                         
Logged

tommyo

  • Throttles on the right!
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 237

    • CVO1: FLHXSE2
Re: My motor is done!!
« Reply #11 on: October 17, 2007, 09:52:34 PM »
Your bike isn't loud from the left side! You had your motor done?
Logged
When in doubt... GAS it!!!


Starting over!!

SirMichael

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 349
  • Non Riding for the moment!!
Re: My motor is done!!
« Reply #12 on: October 18, 2007, 12:26:08 AM »
Quote from: tommyo on October 17, 2007, 09:52:34 PM
Your bike isn't loud from the left side! You had your motor done?
I havn't noticed anything from the left side either, I don't know why! :nixweiss:

 Yah, something was done to my motor, I'm not sure what yet, but someday it will be done!
 
 Once this is all finished and right, I will be done for sure!! ???  ???

 It would be less stressful if we just sat around a camp fire and just watched each other throw our money in it and watched it burn!! :bigcry:

                                                                   Later,
                                                                          MIKE :coolblue:
Logged

d o g o l s

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2315
  • *** ride save and have fun***

    • CVO1: blue Thunder FLHTCUSE-4
    • CVO2: FLHTCUSE-2 black-orange-Jester
    • CVO3: 2008 FXDB black
    • Harley Fan
Re: My motor is done!!
« Reply #13 on: October 18, 2007, 04:05:06 AM »
Quote from: SirMichael103 on October 07, 2007, 11:54:25 AM
I had the 103 put in thursday!! It runs pretty good, still needs to be tuned!! I was going to have it tuned on friday, but the dealer couldn't get me in!! So I have just been riding alittle this weekend and will have it done on tuesday!!
  This motor makes alittle more noise than the other 103 that I did, the tapping sound!! I was told it would because of the bigger cam and heavier springs!! :confused5:
 This is what I ended up doing-  (07-Ultra)
  -SE103 big bore kit w/ flat top forged stroker pistons
  -Heads ported & polished & shaved and bigger valves (10.25:1 comp)
  -50mm throttle body matched to heads
  -251 cams w/adj. pushrods
  -Highflow A/C
  -SERT
  -D&D fatcat 2-1 exhaust w/ performance quiet baffle
  -SE performance clutch kit w/ spring
   Still needs to be tuned, but est. #'s  104-hp  108-tq  :2vrolijk_21:
    will know tuesday, I will post the results!! ;D

                                 Later
                                        MIKE :coolblue:
 

Glad it is turned out the way you wanted it   :2vrolijk_21:
Logged

SirMichael

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 349
  • Non Riding for the moment!!
Re: My motor is done!!
« Reply #14 on: October 18, 2007, 01:32:19 PM »
Quote from: dogols on October 18, 2007, 04:05:06 AM
Glad it is turned out the way you wanted it   :2vrolijk_21:
The motor runs great, it just makes alittle bit of top end noise, so they are going to check the valve springs and all the clearances. Maybe go to lighter springs!!

 I am happy with the #'s that it is putting out, for what I used, it turned out good!! :2vrolijk_21:

                                                                            MIKE :coolblue:
Logged
Pages: [1] 2 3 4  All
« previous next »
 

Page created in 0.235 seconds with 21 queries.