www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Any one put rear mounting hardware on their SERK  (Read 1738 times)

0 Members and 1 Guest are viewing this topic.

bikerbehaviorist

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 147
Any one put rear mounting hardware on their SERK
« on: January 17, 2008, 01:47:24 AM »
I have put the hardware on and mounted a rack for my t-bag. When putting on the rack at first the hoops were too wide apart so that the quick releases did not line up with the docking hardware. With some tweaking and slight bending I was able to get it close enough to make it work. However, releasing the rack from the docking hardware and putting it back on is a pain in the butt.  Researching this, I looked at a FLHR at a dealership and and the tire and fender are quite a bit narrower than the one on my 08SERK so I am thinking that this is the problem. The mounting hardware is fine, but the rack is supposed to fit on that hardware with a narrower tire and fender. Has anyone run into this problem? I do not have to deal with removing the rack because I commute on the bike and usually just leave it on. However I am considering a solo Mustang seat and would then like to remove the rack and t-bag when I am not commuting. Thanks in advance!
Logged

BalDeagle

  • FLHRSE3 Candy Cobalt with Pale Gold Leafing Graphics
  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2648
  • Do it today, tomorrow may be too late......
Re: Any one put rear mounting hardware on their SERK
« Reply #1 on: January 17, 2008, 06:03:45 AM »
I originally got this hardware for my 07 SERK and found that the lids of the panniers caught on the mounting bolts when you opened them. With them being leather I knew that this would ultimately mark them and eventually make a hole so I discarded them and went back with a seperate sissy bar and rack combo that I just take off completely when I want to go back to the "clean" look.

Doesn't seem to be any issue with this luggage rack not supporting a bag either. I did a couple of thousand miles last back end with my good lady and a large Saddlemen Tour Bag strapped to the back.

Nige
Logged
Don't leave it until tomorrow, do it today !


110 SERK FLHRSE3
Power Commander
Doherty PowerPacc + PowerVents + Mystfree
Vance & Hines Slip ons + V & H True Duals
Lots of other shiny bits!

Serkcus

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 276

    • CVO1: 07 Candy Cobalt SERK
Re: Any one put rear mounting hardware on their SERK
« Reply #2 on: January 17, 2008, 08:57:10 PM »
Been there, done that! First try was with the wrong kit, which is 3/4 too narrow. Don t' remember the part number for the correct one, but you have to get creative with the instructions and figure out exactly where to put the various spacers, shims and washers. Took 3 separate assembly/disassembly tries to finally get it exactly right. Too bad the instruction sheet couldn't have been put together by someone who has actually seen a bike. :-\
Logged

bikerbehaviorist

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 147
Re: Any one put rear mounting hardware on their SERK
« Reply #3 on: January 18, 2008, 12:23:13 AM »
I was afraid that Fing with it was the answer, but I am concerned that there is more than one kit - guess I should look into this... Thanks Serkcus :2vrolijk_21:

OK just looked this up with the help of some folks on another forum
FLHRSE3/4 Touring Detachable Docking Hardware Kit should be H-D p/n 53988-07 NOT H-D p/n 53804-06 (ref. page 412 of 2008 H-D Genuine Motor Accessories and Genuine Motor Parts catalog)

Of course I was sold and installed the wrong one My local parts department sucks :-[ :-[ :-[
« Last Edit: January 18, 2008, 12:53:03 AM by bikerbehaviorist »
Logged

Hoist!

  • Monster
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 21634
  • This chit ain't ROCKET SCIENCE!!!!

    • CVO1: '07C FLHRSE3, BLACK ICE OF COURSE, CUSTOM 110" TC 6-SPEED +++, "CYBIL"!!!
    • CVO2: '99 FXR3 BRIGHT & DARK CANDY BLUE W/FLAMES, STAGE II 80" EVO 5-SPEED +++, "JOY"!!!
    • CVO3: 4: & 5: '85 FXWG BLACK w/CUSTOM FLAMES, 110" EVO 6-SPEED +++ CVO style!!!; '08 NSMC PROSG CUSTOM FXR BASED PRO STREET BLACK, 89" EVO 5-SPEED, VERY FAST!!!; '09 NSMC HSTBBR CUSTOM RIGID HOISTBOBBER, SILVER METALFLAKE BATES SOLO SEAT & TIN w/BLACK WISHBONE FRAME, 80" EVO (w/Shovelhead bottom end) 4-SPEED! VERY COOL!!!
Re: Any one put rear mounting hardware on their SERK
« Reply #4 on: January 18, 2008, 09:27:25 AM »
Quote from: bikerbehaviorist on January 18, 2008, 12:23:13 AM
I was afraid that Fing with it was the answer, but I am concerned that there is more than one kit - guess I should look into this... Thanks Serkcus :2vrolijk_21:

OK just looked this up with the help of some folks on another forum
FLHRSE3/4 Touring Detachable Docking Hardware Kit should be H-D p/n 53988-07 NOT H-D p/n 53804-06 (ref. page 412 of 2008 H-D Genuine Motor Accessories and Genuine Motor Parts catalog)

Of course I was sold and installed the wrong one My local parts department sucks :-[ :-[ :-[

That is the correct P/N and I had no problem with it. It's for SERK 3/4. I use a detachable 2-up luggage rack now. I ordered a KTP w/detachable 2-up TP rack for the bike as well.

Hoist! 8)
Logged
"We wanna be free to ride our machines without being hassled by The Man!"

Traxxion Dynamics Suspension Rules! "It ain't braggin' if you can back it up!"

"Cause I'm sitting on top of the world!" (zoom in on satellite map in my Profile)

bikerbehaviorist

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 147
Re: Any one put rear mounting hardware on their SERK
« Reply #5 on: January 18, 2008, 10:26:29 AM »
Quote from: Hoist on January 18, 2008, 09:27:25 AM
That is the correct P/N and I had no problem with it. It's for SERK 3/4. I use a detachable 2-up luggage rack now. I ordered a KTP w/detachable 2-up TP rack for the bike as well.

Hoist! 8)

KTP ??? King tour pack?? Thanks for the confirm on the part #. I looked at the 08 parts catalog (p. 412) and it says it right there in black and white so any idiot,  :oops: I mean literate,  :oops: I mean...... oh well whats another $50  :sauer005: :sauer005:
Logged

Hoist!

  • Monster
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 21634
  • This chit ain't ROCKET SCIENCE!!!!

    • CVO1: '07C FLHRSE3, BLACK ICE OF COURSE, CUSTOM 110" TC 6-SPEED +++, "CYBIL"!!!
    • CVO2: '99 FXR3 BRIGHT & DARK CANDY BLUE W/FLAMES, STAGE II 80" EVO 5-SPEED +++, "JOY"!!!
    • CVO3: 4: & 5: '85 FXWG BLACK w/CUSTOM FLAMES, 110" EVO 6-SPEED +++ CVO style!!!; '08 NSMC PROSG CUSTOM FXR BASED PRO STREET BLACK, 89" EVO 5-SPEED, VERY FAST!!!; '09 NSMC HSTBBR CUSTOM RIGID HOISTBOBBER, SILVER METALFLAKE BATES SOLO SEAT & TIN w/BLACK WISHBONE FRAME, 80" EVO (w/Shovelhead bottom end) 4-SPEED! VERY COOL!!!
Re: Any one put rear mounting hardware on their SERK
« Reply #6 on: January 18, 2008, 10:30:27 AM »
Quote from: bikerbehaviorist on January 18, 2008, 10:26:29 AM
KTP ??? King tour pack?? Thanks for the confirm on the part #. I looked at the 08 parts catalog (p. 412) and it says it right there in black and white so any idiot,  :oops: I mean literate,  :oops: I mean...... oh well whats another $50  :sauer005: :sauer005:

No problem! And yes, King Tour Pak. And BTW, welcome to the site. Enjoy it! :2vrolijk_21:

Hoist! 8)
Logged
"We wanna be free to ride our machines without being hassled by The Man!"

Traxxion Dynamics Suspension Rules! "It ain't braggin' if you can back it up!"

"Cause I'm sitting on top of the world!" (zoom in on satellite map in my Profile)

bikerbehaviorist

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 147
Re: Any one put rear mounting hardware on their SERK
« Reply #7 on: January 19, 2008, 08:57:12 PM »
Actually talked to the parts manager and he is going to take care of me.  ::) Of course the correct part is on back order. Again thanks for the help!!
Logged
 

Page created in 0.219 seconds with 21 queries.