Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[skreminegul07]

Here you go

[Steve_G]

I don't know, but it looks like that cylinder liner has slipped! 

[nixobilly]

Obviously the found a way to clean off all the oil off the fins....

Mark

[MUFFMAN]

Chit, now the pen is going to leak!

[RedBone]

Yea well if someone steals it will overheat and slip out of there hands 

[sadunbar]

The following is the official MOCO press release in response to your question:


"What bad 110 cylinders?"


 

[grc]

I still say all they have to do is drill and tap the cylinders for some strategically placed set screws.  Of course, it would probably take several attempts before they figured out the proper length for the screws (slightly short of piston contact would be a good starting point), but I'm confident they would get it eventually.

Jerry

[sadunbar]

I still say all they have to do is drill and tap the cylinders for some strategically placed set screws.  Of course, it would probably take several attempts before they figured out the proper length for the screws (slightly short of piston contact would be a good starting point), but I'm confident they would get it eventually.

Jerry

"Eventually" being the pertinent word in your prediction...

[Rooster452]

The following is the official MOCO press release in response to your question:


"What bad 110 cylinders?"


 

Keep repeating it and it must be true...........