If you saw in the other post you already know I pulled my forks out, boxed them up and they are on their way to Georgia.
I was all set to just have the “CVO SEEG” ride height built into the forks and use the 300 mm shocks.
When talking to Dan (Traxxion) we came up with installing the normal EG ride height in the forks and using the 330 mm shocks.
I am not sure and looking for opinions.
I am 5’9, about 165. Figure with some stuff in the bags and dressed for riding I’m figuring about 200 pounds.
Most of the time I ride without the Tourpak and solo.
When my wife joins we add her weight and the Tourpak.
With the 12” Progressives I have bottomed out on occasion, but I think the rebound bump is more annoying.
Ground clearance on turns never seemed to be a big deal, and my floorboard arms are already scraped up a bit, so no advantage there.
Do I stick with the 05 SEEG lowered ride height? Raise it to the normal Height?
I can plant my feet square on the ground and I like that, even with the Corbin seat (which has an extra 1” of foam installed.
Looking for the opinions of those that have done this already.
The forks will not be there until late Thursday, so I have a couple of days to decide. Although the shocks could be an issue.