www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3]  All

Author Topic: Passing Lamps Installed  (Read 10973 times)

0 Members and 1 Guest are viewing this topic.

bikerbehaviorist

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 147
Re: Passing Lamps Installed
« Reply #30 on: June 02, 2008, 09:33:34 PM »
Couple of questions. For those of you who left the turn signal wiring, did you just cut it a little long of where it comes out of the bars, or is there a way to stuff them into the bars????
Do the stock bullet signals not work with the spot light bracket?? Thanks!!
Logged

RBFB

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 147
  • FLHRSEI.ORG
Re: Passing Lamps Installed
« Reply #31 on: June 03, 2008, 01:02:35 AM »
I cut the wires off pretty much flush, then pushed them inside the switch housings. Then I put a chrome button cap in the hole, it looks great.

You have to buy different turn signals to fit on the brackets. They are about $60 full retail.
Logged

bikerbehaviorist

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 147
Re: Passing Lamps Installed
« Reply #32 on: June 03, 2008, 10:46:12 PM »
Thanks!!!
Logged

CVOJOE

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2884
  • Life's a journey, why not enjoy the ride?
Re: Passing Lamps Installed
« Reply #33 on: June 04, 2008, 12:29:51 AM »
PIAA makes the H3(Passing lamp style) in the following ratings;
35/70W Xtreme White
55/110W Xtreme White
55/85W Star White
55/110W Super Plasma
55/100W Xtreme White

Some of these are in packs of 2 which makes it easier for these puppies. You can check pricing and the general specs at http://whitehorsegear.com or the PIAA site, etc. The 55W do draw more amps of course, so you'll have to do the math as to where it's best to wire them in fuse wise.

Joe
Logged
2003 FLHRSEI2. (Sold) :(

Horsepower is how fast you hit a wall.Torque is how far you will take the wall with you.

redbaron

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
Re: Passing Lamps Installed
« Reply #34 on: June 04, 2008, 11:01:46 PM »
how much do you have in all that? I want to do the same on my 08 SERK,I can only find the #69227-04a but it doesnt come with the bulbs or rings? does anyone sell the whole kit?
Logged

courter

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 426
  • Enjoying the RIDE!!

    • CVO1: 2008 FLHTCUSE3 Canyon/Silver
    • CVO2: 2002 FLHRSEI Purple/Silver Flames
Re: Passing Lamps Installed
« Reply #35 on: June 04, 2008, 11:21:35 PM »
Quote from: redbaron on June 04, 2008, 11:01:46 PM
how much do you have in all that? I want to do the same on my 08 SERK,I can only find the #69227-04a but it doesnt come with the bulbs or rings? does anyone sell the whole kit?
That is the whole kit, but not to you, my friend.  Oh no... you bought a CVO which doesn't come with the silly throw-away parts that everybody else has... I'm in the same boat with my wife Lisa's (new to her) 02 SERK.  Want to do the same mod as here, but have to buy more chit to do it.

Dave
Logged

redbaron

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
Re: Passing Lamps Installed
« Reply #36 on: June 04, 2008, 11:31:02 PM »
Quote from: courter on June 04, 2008, 11:21:35 PM
That is the whole kit, but not to you, my friend.  Oh no... you bought a CVO which doesn't come with the silly throw-away parts that everybody else has... I'm in the same boat with my wife Lisa's (new to her) 02 SERK.  Want to do the same mod as here, but have to buy more chit to do it.

Dave
that sucks! I hate to spend another $500 after paying $1500 over retail,Damn,I thought my Goldwing was expensive! 
Logged
Pages: 1 2 [3]  All
« previous next »
 

Page created in 0.215 seconds with 20 queries.