Topic: Here is a good one for you tech guys? (Read 1133 times)

TORKER07 · « **on:** July 24, 2008, 02:43:34 AM »

My bike has been running somewhat fine for the entire summer so far. A couple of days ago I stopped for gas and when I started the bike up it ran the smoothest it ever ran, awesome. Well yesterday when I left my sons house the idle went to around 1500 RPM and wouldn't come down even after a mile or so. I stopped and shut the bike down, waited about 20 seconds and restarted and it was fine except it was no longer running smooth as it was before. Any ideas as to what it could be, temp sensor, ECM, sticking throttle, or maybe just a bad connection?

Puzzled
Tork

OH yea, it is a FLHTCUSE2 with around 15K on the clock. Thanks

CVOJOE · « **Reply #1 on:** July 25, 2008, 07:47:49 PM »

Check out this thread....it sounds like the same problem:

http://www.cvoharley.com/smf/index.php?topic=23994.0

TORKER07 · « **Reply #2 on:** July 26, 2008, 07:56:55 AM »

Quote from: CVOJOE on July 25, 2008, 07:47:49 PM

Check out this thread....it sounds like the same problem:

http://www.cvoharley.com/smf/index.php?topic=23994.0

Thanks for the tip, I'll give it a try.

Tork

TORKER07 · « **Reply #3 on:** July 26, 2008, 11:54:28 PM »

I did the reset routine this morning and was fine all day of riding, thanks for the tip.

Tork

Author Topic: Here is a good one for you tech guys? (Read 1133 times)

TORKER07

Here is a good one for you tech guys?

CVOJOE

Re: Here is a good one for you tech guys?

TORKER07

Re: Here is a good one for you tech guys?

TORKER07

Re: Here is a good one for you tech guys?