Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tunedse2]

anyone else showing a quarter and only taking 2.5 gallons at the pump?
I go to fill at 1/4 and I really have 1/2+

[lucky1]

I had the same problem. It took three trips to the dealer to fix. The float would hang at 1/4 tank. Ran out of gas on I-5 San Diego the second day I had it.  

[Bad Bill]

I had the same problem. It took three trips to the dealer to fix. The float would hang at 1/4 tank. Ran out of gas on I-5 San Diego the second day I had it.  

Lucky,

Which dealer figured it out?

Bill

[lucky1]

Bill, it was fixed by San diego H-D on Kettner Blvd. I think Mrs. Red Hot also had this problem.

[sefatboyscott]

My gauge will read empty and only take 4 gallons of gas...........also my gauge has condensation in it. Anyone else with that problem?

[Pifemaster]

I also had the condensation problem. I eliminated it today by having my dealer install the following new fuel cap - gauge  kit:

http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448768318&FOLDER%3C%3Efolder_id=2534374309077606&ASSORTMENT%3C%3East_id=2534374309077606&bmUID=1133485371985&bmLocale=en_US

All I can say is - IT IS AWSOME!!! You have to see it in person to appriciate how neat a setup it is.

Naturally this was not done under warranty so I had to pay for it but I love the look and the functionality.  

[CVOJOE]

Now that's a kewl looking setup, think it would be standard on CVO's huh? Looks sorta like the Kuryakyn LED/Battery gauge and recessed filler set-up but will have to look at this new one in person. Since it's H-D,it's expensive?  [smiley=nixweiss.gif]

[Pifemaster]

I really like the way it works. It has several blue LED lights in the left cap that indicate fuel level. It also flashes a red LED light when it gets low (in place of the light on the speedo) It is much more noticeable. Plus when the bike is off, you can not see anything - it just looks like a chrome cap.

[Hotrodracer]

I put the same kit on mine about 2 mo.s ago. Really looks good at night!!

[fatboyse2]

Here's the new flush gauge installed. [smiley=xyxthumbs.gif]

[AUSSIE_FLSTFSE]

Here's the new flush gauge installed. [smiley=xyxthumbs.gif]

Dam it fatboyse2, I hate it when I see these new things that look cool & work better than the stock item. It always ends up costing me $$$$$$$$$$$$$$$$.

 [smiley=drink.gif]

[fatboyse2]

Tell me about it...

PS, finger prints are extra, still gotta clean it up after all the engine work and mega bucks it's cost me.  btw, the thunderheaders sound even better than expected. [smiley=xyxthumbs.gif]

[AUSSIE_FLSTFSE]

FB,
how does she run now? was it what you expected? do you think you got up to 115Hp? does it pull like a schoolboy?I need to know! it may help me with my OCD.

 [smiley=drink.gif]

[fatboyse2]

It was like it was broken before.  Now it pulls like a freight train [smiley=banana.gif].  I'm giving it a few miles of breakin before running hot on the dyno.  Also less drag with those flush gas caps installed [smiley=huepfenlol2.gif]

[J.J.]

Now that's a kewl looking setup, think it would be standard on CVO's huh? Looks sorta like the Kuryakyn LED/Battery gauge and recessed filler set-up but will have to look at this new one in person. Since it's H-D,it's expensive?  [smiley=nixweiss.gif]

CVOJOE,
Do you have a part number on the Kuryakyn?  I see that this will not fit my '01 carbed fatty.