www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2 3  All

Author Topic: Shifter Shaft Seal Leak  (Read 16039 times)

0 Members and 1 Guest are viewing this topic.

REGGAB

  • Guest
Shifter Shaft Seal Leak
« on: September 09, 2009, 10:00:32 PM »
This time it's on the Purple Bike, and technically, it isn't a leak....yet.  Isn't dripping anywhere.  Just gets really grimy under there after riding for awhile.  Actually it has been seeping for quite awhile, better than 2000 miles.  I was thinking (hoping) this past weekend's trip to visit Ken and Cheri would do it in, and it would finally start dripping, which would undoubtedly win approval from the House Finance Committee to tear down, replace the seal, along with other seals and gaskets with Cometics, and since it would be torn down that far, may as well go ahead and replace the stock 5 speed with a Baker OD6.  The Finance Committee is learned in these processes and will not fund component replacements unless the cause significantly warrants such action and replacement procedures involve labor which would have to be repeated once the new transmission becomes necessary.....despite my pleas.

It's only a matter of time.   :huepfenlol2:
Logged

naitram

  • SMF Administrator
  • 10K CVO Member
  • ******
  • Online Online
  • Posts: 12702
    • MA


    • CVO1: FLTRXSE2 "Marvin"
Re: Shifter Shaft Seal Leak
« Reply #1 on: September 10, 2009, 10:40:21 AM »
you could get over aggressive cleaning around the offending seal....
Logged
:cool26: naitram...


"I reject your reality and substitute my own."
"Work is the curse of the drinking class."

erniezap

  • Global Moderator
  • 2.5K CVO Member
  • *****
  • Offline Offline
  • Posts: 4900

    • CVO1: 2012 SEUC - Black/Orange
Re: Shifter Shaft Seal Leak
« Reply #2 on: September 10, 2009, 11:49:02 AM »
Talk to Jim (HD-Dude).  Both my bikes had that same seepage.  We replaced the HD seal with Cometics and the problem has not occurred again.
Logged
2012 Black/Orange SEUC

Boatman

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4816
  • FLHRSEI.ORG

    • CVO1: 2014 CVO Limited
    • CVO2: 2010 SEUC-accident victim-gone
    • CVO3: 2005 SEEG-traded on 2010
Re: Shifter Shaft Seal Leak
« Reply #3 on: September 10, 2009, 11:57:42 AM »
Fellows, Henry wants a 6 speed.  Renea said no thus far.   I would be pouring some fluid under the green melon and once she sees the fluid on their clean garage floor, she will give the ok..   Just sayin'..        :cherry:
Logged

hogasm

  • Guest
Re: Shifter Shaft Seal Leak
« Reply #4 on: September 10, 2009, 01:34:02 PM »
Quote from: Boatman on September 10, 2009, 11:57:42 AM
Fellows, Henry wants a 6 speed.  Renea said no thus far.   I would be pouring some fluid under the green melon and once she sees the fluid on their clean garage floor, she will give the ok..   Just sayin'..        :cherry:

Bob I think the leak is in the Purple King

Henry could just send me the 2.5G and then he wouldn't need a 6 speed :coolblue:
Logged

HogBreath

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5351
  • FLHRSEI.ORG

    • CVO1: 2009 cvo roadglide
    • CVO2: 2014 CVO StreetKing
Re: Shifter Shaft Seal Leak
« Reply #5 on: September 10, 2009, 03:39:02 PM »
I could make it leak for you EASILY. Why didn't yo say something last weekend?  :nixweiss:
Logged
It's not the destination. It's the Journey.

Hoist!

  • Monster
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 21634
  • This chit ain't ROCKET SCIENCE!!!!

    • CVO1: '07C FLHRSE3, BLACK ICE OF COURSE, CUSTOM 110" TC 6-SPEED +++, "CYBIL"!!!
    • CVO2: '99 FXR3 BRIGHT & DARK CANDY BLUE W/FLAMES, STAGE II 80" EVO 5-SPEED +++, "JOY"!!!
    • CVO3: 4: & 5: '85 FXWG BLACK w/CUSTOM FLAMES, 110" EVO 6-SPEED +++ CVO style!!!; '08 NSMC PROSG CUSTOM FXR BASED PRO STREET BLACK, 89" EVO 5-SPEED, VERY FAST!!!; '09 NSMC HSTBBR CUSTOM RIGID HOISTBOBBER, SILVER METALFLAKE BATES SOLO SEAT & TIN w/BLACK WISHBONE FRAME, 80" EVO (w/Shovelhead bottom end) 4-SPEED! VERY COOL!!!
Re: Shifter Shaft Seal Leak
« Reply #6 on: September 10, 2009, 05:34:20 PM »
You want it to leak Henry! Bring it to MV and lemme ridfe it! I just can't guarantee that it will be your ONLY leak!!! ::) ;D ;D ;D ;D ;D ;)

Hoist! :coolblue:
Logged
"We wanna be free to ride our machines without being hassled by The Man!"

Traxxion Dynamics Suspension Rules! "It ain't braggin' if you can back it up!"

"Cause I'm sitting on top of the world!" (zoom in on satellite map in my Profile)

spydglide

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11892
  • spyder-psychle
Re: Shifter Shaft Seal Leak
« Reply #7 on: September 10, 2009, 06:39:45 PM »
Quote from: Hoist! on September 10, 2009, 05:34:20 PM
You want it to leak Henry! Bring it to MV and lemme ridfe it! I just can't guarantee that it will be your ONLY leak!!! ::) ;D ;D ;D ;D ;D ;)

Hoist! :coolblue:
:o  Hard on 'Em.  :oops: :huepfenlol2: har!  spyder
Logged
2004 FLHTCSE Cobalt 'Huckleberry'  .....94K+mi.     &  1994 FLSTN 'OleGranny' .....116K+mi.

Boatman

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4816
  • FLHRSEI.ORG

    • CVO1: 2014 CVO Limited
    • CVO2: 2010 SEUC-accident victim-gone
    • CVO3: 2005 SEEG-traded on 2010
Re: Shifter Shaft Seal Leak
« Reply #8 on: September 10, 2009, 07:22:26 PM »
Quote from: hogasm on September 10, 2009, 01:34:02 PM
Bob I think the leak is in the Purple King

Henry could just send me the 2.5G and then he wouldn't need a 6 speed :coolblue:

You're right, I need to read better I guess.  Thanks for the heads up.
Logged

hogasm

  • Guest
Re: Shifter Shaft Seal Leak
« Reply #9 on: September 10, 2009, 07:47:56 PM »
Quote from: Boatman on September 10, 2009, 07:22:26 PM
You're right, I need to read better I guess.  Thanks for the heads up.

Thats cool :2vrolijk_21:

Roomer has it that the check is in the mail :apple:
Logged

REGGAB

  • Guest
Re: Shifter Shaft Seal Leak
« Reply #10 on: September 10, 2009, 09:56:13 PM »
Thanks guys.  I've given fleeting thought to such covert actions as using a small 90 degree scratch awl to help speed the leaking process, but I'm afraid my integrity would get in the way.  Besides, Renea sees right through my bullchit anyway.  Sure do wish it would start leaking.......and the sooner, the better.  I've become quite accustomed to the Baker OD6 in the Green Bike.  That is one sweet transmission.  I just hope she lets me switch the Purple Bike's primary gearing to 3.37 like the Green Bike.  The added torque is awesome.  80mph at 3000rpm in sixth gear is the perfect operating condition for me.  Really like that combination.

But for now.....I'll just ride it.....and keep trying to hit that sixth gear.......that just isn't there.   :huepfenlol2:
Logged

SBB

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 16404
  • Go fast or go home! EBCM member # 2.36 .01%
    • CVO2: 2011.5 SEUC
    • CVO3: 2012 SERG
Re: Shifter Shaft Seal Leak
« Reply #11 on: September 10, 2009, 10:14:11 PM »
Quote from: HML on September 10, 2009, 09:56:13 PM
80mph at 3000rpm in sixth gear is the perfect operating condition for me.  Really like that combination.

But for now.....I'll just ride it.....and keep trying to hit that sixth gear.......that just isn't there.   :huepfenlol2:

80 @ 3000rpm is what my 09 SEUC does.
It's a real sweet spot.



Give it time Henry.
It will come when it's time.
You have about as much patience as me, and you want it now.
It will come.

SBB
Logged

2012      SERG  "Nu Blue"
2018      Goldwing   
2003      HD Electra Glide Classic Silver and Black, of course!                
2 2012   Suzuki Burgmans
2018      Shelby GT350, 963 crank hp, 825 rear wheel hp

REGGAB

  • Guest
Re: Shifter Shaft Seal Leak
« Reply #12 on: September 10, 2009, 11:03:47 PM »
Quote from: SBB on September 10, 2009, 10:14:11 PM

Give it time Henry.
It will come when it's time.
You have about as much patience as me, and you want it now.
It will come.

SBB


That's true, Chip.  Maybe a few heat cycles in cold weather will wear it down.  No doubt the seal is eight years old since the bike is an August 2001 build.  Just under 17K miles.  It'll bust this winter when Rod is super busy with other stuff.  It'll get done tho'.   :2vrolijk_21:
Logged

HogBreath

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5351
  • FLHRSEI.ORG

    • CVO1: 2009 cvo roadglide
    • CVO2: 2014 CVO StreetKing
Re: Shifter Shaft Seal Leak
« Reply #13 on: September 11, 2009, 03:07:48 PM »
If a guy can justify a new transmission because of a $10 oil seal, why couldn't I justify a new engine because of fouled plugs?
Logged
It's not the destination. It's the Journey.

REGGAB

  • Guest
Re: Shifter Shaft Seal Leak
« Reply #14 on: September 11, 2009, 03:12:32 PM »
Quote from: HogBreath on September 11, 2009, 03:07:48 PM
If a guy can justify a new transmission because of a $10 oil seal, why couldn't I justify a new engine because of fouled plugs?

Too easy!

Labor $.   :2vrolijk_21:
Logged
Pages: [1] 2 3  All
« previous next »
 

Page created in 0.26 seconds with 21 queries.