www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Hard to start when warm  (Read 4402 times)

0 Members and 1 Guest are viewing this topic.

uawman

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 182
Hard to start when warm
« on: September 25, 2009, 09:20:40 AM »
I've got a 04 SEEG with 10:1 pistons, 48mm Delphi, 55g cams, flowed and ported heads (BDI), and a Bakers DDS6.
When the bike is first started it starts up immediately.  Once it's warmed up after riding and I go to re-start (like filling up at a gas station) it takes about 3-5 tries to start up. Question, is the compression too high and creates a drag once warmed up or is the starter too weak to push through since it's hot. Invest in a starter or compression releases?
Logged

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: Hard to start when warm
« Reply #1 on: September 25, 2009, 09:27:39 AM »
Quote from: uawman on September 25, 2009, 09:20:40 AM
I've got a 04 SEEG with 10:1 pistons, 48mm Delphi, 55g cams, flowed and ported heads (BDI), and a Bakers DDS6.
When the bike is first started it starts up immediately.  Once it's warmed up after riding and I go to re-start (like filling up at a gas station) it takes about 3-5 tries to start up. Question, is the compression too high and creates a drag once warmed up or is the starter too weak to push through since it's hot. Invest in a starter or compression releases?

Check the easy stuff first.  Battery cables for voltage drop (lots of issues over the years with corrosion hidden inside the insulation, for instance), battery load test. 

Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

uawman

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 182
Re: Hard to start when warm
« Reply #2 on: September 25, 2009, 09:36:12 AM »
Maybe, I've got one of those real flexible (read expensive) cables I have from a chopper build.  I'll give an update when I've tested it (tomorrow).
Logged

uawman

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 182
Re: Hard to start when warm
« Reply #3 on: September 28, 2009, 06:05:03 PM »
Changed cables with the same results.
Now on to the battery load test.
Logged

uawman

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 182
Re: Hard to start when warm
« Reply #4 on: October 01, 2009, 03:35:33 AM »
Could this be caused by mapping?  It starts easy when it's cold and runs great otherwise.
Logged

hd-dude

  • Global Moderator
  • 5k CVO Member
  • *****
  • Offline Offline
  • Posts: 6646
  • 2005 Cherry FLHTCSE2 "Obsession"

    • CVO1: 05 FLHTCSE2
    • Metal Dragon
Re: Hard to start when warm
« Reply #5 on: October 01, 2009, 10:51:55 PM »
Quote from: uawman on October 01, 2009, 03:35:33 AM
Could this be caused by mapping?  It starts easy when it's cold and runs great otherwise.

Yes, What tuner? When you say hard to start do you mean crank over? Or actually fire? Do you have compression releases?
Logged

uawman

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 182
Re: Hard to start when warm
« Reply #6 on: October 03, 2009, 04:46:36 AM »
After doing some research here it looks to be the ringset and pinion gear.  I'll order today.  Any suggestions for a vender (read-cheapest)?
Logged

LarryB

  • Tennessee Squire
  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3656

    • CVO1: 09 FLTRSE3 The Grey Ghost
Re: Hard to start when warm
« Reply #7 on: October 03, 2009, 07:50:36 AM »
Quote from: hd-dude on October 01, 2009, 10:51:55 PM
Yes, What tuner? When you say hard to start do you mean crank over? Or actually fire? Do you have compression releases?
I'm with Jim on this route, I don't think his bike came with releases,
Logged
Take it Easy Greasy Cuz it's a long walk home.

Did I shave my head for this?
 

Page created in 0.221 seconds with 21 queries.