I have decided I am going to go ahead with the 200 rear. I will be using a 2006 FLSTFSE2 fender which I have sourced unpainted but primed through chicago HD complete with fender supports & a Zodiac wide ass kit which only has a 1/2 inch primary offset & will run the stock 1 1/8 belt. I also plan to use my stock wheel but have it widened to 6 or 6 1/2 inches (& possibly chromed while it is off) & run a 200/60 x 16 tire, which is 3/4 inch taller tha the stock tire therefore I will be able to lower the rear a little to compensate. The only thing I'm not sure about is recalibrating the speedo to suit the new taller tire. Also I hope to find a good painter who will paint to match my stock paint. It will probably take another 4 weeks to get all the parts together.
I will have to decide when I have them wether or not I will have it finished before Easter as 6 of us have a trip planned up to North Queensland (its only about 600mile round trip) but none of us ride baggers just fatboys, wideglides, Softtails & an FXR
Cheers
[smiley=drink.gif]
Aussie