Spent part of the morning with the SERK project before going riding a bit this afternoon. The old Road King had an honest to god moment this morning. A real live momentous moment. Put in a battery and tested most of the electrics.
So far so good too. There was a bit of harness repair to be done. Nothing major but enough to make a guy worry just a bit on first hook up. All the lights work when and how they're supposed to, no fuses blew, heard all the relays relay when they should have. Mostly all good so far. Was nice to see.
Say "mostly" all good because it's doing one odd thing I'm unfamiliar with. When my jumper wire does the equivalent of turning the switch on the running lights come on as you'd expect. They stay on for three or four seconds then they quickly flash about five times. It's a very quick flash.
Quick look in the electical/diags manual didn't find that. The running lights and signals otherwise work as they should. But there is something somewhere that the ECM or TSM thinks isn't right.
The ECM and TSM aren't mated. The ECM was from an un-alarmed bike; or at least I think it was. But perhaps it's a pairing issue between the two if the ECM had been mated to a TSSM previously. Not far enough along to be close to firing the bike so can't yet do a full systems check. Or maybe flaky TSM.
Was pleased enough to see it did all it did this morning without popping a fuse or getting otherwise cranky that I'm not going to worry much about the problem now. Something to track down later.
Nice bike

!