Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[twmartin1970]

Did you have to change any cables or lines ?
Or did the stock ones work ?

All stock cables worked.  I didn't do the work, but the tech said they were a pain to install.  I had them installed before I picked up the bike.

[Highjagger]

THXS great .

[TN]

i like them boards allot. 


TN

[rganz]

What did you to secure the fairing when you removed the guards as they also hold the fairing in place. I see you have a different bracket design--is it a custom piece or off the shelf.

Rob

[twmartin1970]

What did you to secure the fairing when you removed the guards as they also hold the fairing in place. I see you have a different bracket design--is it a custom piece or off the shelf.

Rob

Paul Yaffe sells an engine guard eliminator bracket.  They make one specific for the 2009's I believe.

[Chains]

Looks great, turnsignals are something you won't see on every other bike. 

[seharleyrider]

my dealer says I need 6" longer brake and clutch lines to install the 10" OEM Monkey Bars! Boy am I ever confused about this deal now. Even had Kevin from PYO call them and they say they won't work with the OEM cables.

[09S/E roadglide]

check the length of the stock bars....not much shorter that the 10s the stealer is trying to screw you.

[Highjagger]

All stock cables worked.  I didn't do the work, but the tech said they were a pain to install.  I had them installed before I picked up the bike.

How is the comfort especially with your arms , which height do you have ?
Could you post a pic with you sitting on the bike and holding the grips ?
And a pic when the turn left or right the handlebar to see where the grips are in comparison to the windshield , would they touch it when using a tall shield ?