Finally learned how to use the Smart Tune feature on my SERT.....
I am using it to clean up my VE tables. Looking to get better gas mileage as i am only getting about 34 miles to the gallon right now.
Anyhow i recorded, downloaded, blended. Then I reflashed my new map. Now waiting for a good day to do all of my VE Smart Tunes. What would be the best temperature and humidity to do this in?
Scotr
I just finished mine as well, after doing my Smartune runs and blending the maps there was less than 5% difference so the original map was very close. I did change the CLB tables as they were still very lean and then I made some changes to the AFR table for cooling. I just finished tonight so I will check the milage tomorrow and let you know how it came out. Also here is a copy of my AFR map just for FYI, the bike is running really strong in-fact I cant believe how much the SEPST woke up the engine.
Air-Fuel Ratio Filename: C:\ProgramData\Super Tuner\Delphi\Tuning Files\Big
Twin\Smart tune Save\176PQ006-001finalmap5152010.dt0
Last Saved Time: 5/15/2010 10:07:17 PM
View: Working
Table: Air-Fuel Ratio
RPM2030405060708090100
750 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.2 12.5
1000 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.2 12.5
1250 13.8 14.6 14.6 14.6 14.6 14.6 14.6 13.2 12.5
1500 13.8 14.6 14.6 14.6 14.6 14.6 14.6 13.2 12.5
1750 13.8 14.6 14.6 14.6 14.6 14.6 14.6 13.2 12.5
2000 13.8 14.6 14.6 14.6 14.6 14.6 14.6 13.2 12.5
2250 13.8 14.6 14.6 14.6 14.6 14.6 14.6 13.2 12.5
2500 13.8 14.6 14.6 14.6 14.6 14.6 14.6 13.2 12.5
3000 13.8 14.6 14.6 14.6 14.6 14.6 14.6 13.2 12.5
3500 13.8 14.6 14.6 14.6 14.6 14.6 14.6 13.2 12.5
4000 13.8 14.6 14.6 14.6 14.6 14.6 14.6 13.2 12.5
4500 13.6 13.6 13.6 13.6 13.6 13.6 13.4 13.1 12.5
5000 13.1 13.1 13.1 13.1 13.1 13.1 12.9 12.7 12.5
5500 12.8 12.8 12.8 12.8 12.8 12.7 12.6 12.5 12.5
6000 12.8 12.8 12.8 12.8 12.8 12.7 12.6 12.5 12.5
6500 12.8 12.8 12.8 12.8 12.8 12.7 12.6 12.5 12.5
7000 12.8 12.8 12.8 12.8 12.8 12.7 12.6 12.5 12.5