Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Diamondback]

 

[Jerry/MD]

Pic #3 viewing through the windshield.

Thanks for the front view pic Heatwave. Gotta say, it looks much better than the H-D version.

Jerry/MD

[Firefox]

Yes, very nice, thanks for the pics.

[jamescode3]

Hey that looks good..I ordered one just like that for my bike last week and should be getting it soon. Glad to know it s going to look good.

[jcraig147]

My 2010 SEUC-Blk has the NAV System built into the dash above the guages on the left side.  Any idea if these bags will still fit?

Joe

[Heatwave]

My 2010 SEUC-Blk has the NAV System built into the dash above the guages on the left side.  Any idea if these bags will still fit?

Joe

Not sure. My Zumo is attached to the handlebar.  My guess is that it'll fit but it may not be very convenient to open the bag behind the GPS.

[49445CVO]

Ok....Got mine and decided to set it out in the 90+ degree sun and then tried to install.  I think it gonna work fine but it will take some pressure to get it in place.

[Heatwave]

Ok....Got mine and decided to set it out in the 90+ degree sun and then tried to install.  I think it gonna work fine but it will take some pressure to get it in place.

Only the first time. After its molded itself to the windshield and dashpad shape over time, you'll be able to drop it into position with your eyes closed.

[bluegoose]

Use a heat gun to heat the end corners of the pouches.  It makes the install a lot easier.

[49445CVO]

Use a heat gun to heat the end corners of the pouches.  It makes the install a lot easier.

Yeah I don't have one of those...I might have to get one

[Heatwave]

Yeah I don't have one of those...I might have to get one

You really won't need a heat gun in my opinion. Overkill based on my experience of taking it on and off at least 3 times so far.

[tjstreetglide]

Did you have to get longer fairing screws?

[Heatwave]

Did you have to get longer fairing screws?

No.... I used the same screws however the screws on my fairing are the ones that come with the HD's LED windshield light trim bar. I'm not sure if they are the same length as the stock one's however my guess is they are slightly longer to accomodate the thicker LED trim piece. My guess is that the length that actually threads into the inner fairing is the same length so I don't think there will be an issue. Someone that used the original CVO trim piece instead of the LED windshield trim might have a better perspective if there's any issues with the stock screws.

I know that the LED trim screws had absolutely no issue being long enough to accomodate the bags.

[Mr_Ed]

My 2010 SEUC-Blk has the NAV System built into the dash above the guages on the left side.  Any idea if these bags will still fit?

Joe

I have a black SEUC as well and what I did was, I bought the T-Bag triple pouch, cut the two end bags off and used just the middle one.  Looks very nice on the bike sitting between the GPS on the left and my handlebar mounted Valentine One on the right.  I don't have a pic at the moment as the bike is tore down pretty good for some mods I've done, but by tomorrow I should have it back together and I'll take one if you like. 

[bluegoose]

Did you have to get longer fairing screws?

I used the stock fairing screws - no problem.