Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Need Install Guide for 90948-00 Saddle Bag Install Kit  (Read 1912 times)

0 Members and 1 Guest are viewing this topic.

deaf1

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 439
Need Install Guide for 90948-00 Saddle Bag Install Kit
« on: July 09, 2010, 09:09:42 PM »

Bought the kit to let me put hard bags on the bike,  and it didnt come with any instructions.

Harley site has
http://www.harley-davidson.com/en_US/Media/downloads/Service/isheets/-J04644.pdf  but it says to "Install the saddlebag following the instructions in the appropriate Service Manual using the hardware supplied
in this kit."

Anyone have a page for instructions?

Scott
Logged

deaf1

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 439
Re: Need Install Guide for 90948-00 Saddle Bag Install Kit - HELP!
« Reply #1 on: July 10, 2010, 11:57:06 PM »

Bump!  HELP!
Logged

Harleypingman

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1101
Re: Need Install Guide for 90948-00 Saddle Bag Install Kit
« Reply #2 on: July 15, 2010, 08:44:24 AM »

I checked my '04 and '10 HD Touring SM's and there isn't a detailed set of instructions for installing all of the hardware on the saddlebag.
Logged

retired_colonel

  • Retired Army
  • Newbie
  • *
  • Offline Offline
  • Posts: 45
Re: Need Install Guide for 90948-00 Saddle Bag Install Kit
« Reply #3 on: July 19, 2010, 12:52:43 PM »

Bought the kit to let me put hard bags on the bike,  and it didnt come with any instructions.

Harley site has
http://www.harley-davidson.com/en_US/Media/downloads/Service/isheets/-J04644.pdf  but it says to "Install the saddlebag following the instructions in the appropriate Service Manual using the hardware supplied
in this kit."

Anyone have a page for instructions?

Scott

Hi, Scott...I did the same for my '04 FLHRC a couple years ago.  I had the same 'no instructions' experience.  So, I just used the parts diagram to put them together, and they work just fine.  The only real question I had was how the 'stick on' gasket was applied to the lid...so I just imposed on a fellow rider to see how they were done from the factory on his bags.  Surprisingly, they went together with very few 'hiccups'.  On the FLHRC, the bags then installed just as the leather ones had.  Guess comments are not much more than 'encouragement' that it can be done...granted with patience.  Once one is done, they other goes much quicker...as with most things that come in 'two's'!!    Steve.
Logged
2008 FLHRSE4 x 2
2004 FLHRCI
2003 FXDL

deaf1

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 439
Re: Need Install Guide for 90948-00 Saddle Bag Install Kit
« Reply #4 on: July 19, 2010, 11:06:50 PM »

Finally got it done.. Had to have a buddy come over with his bags... It went really quick after that!

Now,  a tour pak?

Scott
Logged
 

Page created in 0.218 seconds with 20 queries.