Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 ... 19 20 [21] 22 23 ... 26

Author Topic: REDSHIFT 575 CAMS & OTHER PRETTY PARTS  (Read 84491 times)

0 Members and 1 Guest are viewing this topic.

ajh

  • Newbie
  • *
  • Offline Offline
  • Posts: 8
  • FLHRSEI.ORG
Re: REDSHIFT 575 CAMS & OTHER PRETTY PARTS
« Reply #300 on: June 28, 2006, 05:50:20 PM »

This is the "B" 103 in stock form, both graphs are showing SAE Corrected run fyi.
Logged

Big Al

  • If not now, when?
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 397
  • FLHRSEI.ORG
    • TX


    • CVO1: 2002 FLHRSEI
    • CVO2: 2006 FLHTCUSE
    • CVO3: 2024 RA1250SE
    • T. Allan Hamilton
Re: REDSHIFT 575 CAMS & OTHER PRETTY PARTS
« Reply #301 on: June 28, 2006, 05:52:26 PM »

Quote
This is the "B" 103 in stock form, both graphs are showing SAE Corrected run fyi.

Thanks for doing this- it really lets me know what we are getting and what we're not. [smiley=xyxthumbs.gif]
Logged
Big Al
1999 FLHTCU/I w. Hack (Kaz' ride)- Sold
2006 FLHTCUSE- Hit a deer- Written off
2013 Tri-glide- Sold
2012 BMW K1600GTL- Commuter
2016 FLTRU Road Glide Ultra Limited- Sold
2024 RA1250-SE- CVO Pan America

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32650
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: REDSHIFT 575 CAMS & OTHER PRETTY PARTS
« Reply #302 on: June 28, 2006, 06:05:37 PM »

Quote
Thanks for doing this- it really lets me know what we are getting and what we're not. [smiley=xyxthumbs.gif]
From some one that has done these upgrades how about I show you instead of tell you what I get everytime I twist the throttle......

1st gear ;D, 2nd gear ;D, 3rd gear ;D, 4th gear ;D, 5th gear ;D

 [smiley=pumpkin.gif]
Ride Safe,
Fired00d
 [smiley=fireman.gif]
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

Big Al

  • If not now, when?
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 397
  • FLHRSEI.ORG
    • TX


    • CVO1: 2002 FLHRSEI
    • CVO2: 2006 FLHTCUSE
    • CVO3: 2024 RA1250SE
    • T. Allan Hamilton
Re: REDSHIFT 575 CAMS & OTHER PRETTY PARTS
« Reply #303 on: June 28, 2006, 06:16:42 PM »

Quote
From some one that has done these upgrades how about I show you instead of tell you what I get everytime I twist the throttle......

1st gear ;D, 2nd gear ;D, 3rd gear ;D, 4th gear ;D, 5th gear ;D
Logged
Big Al
1999 FLHTCU/I w. Hack (Kaz' ride)- Sold
2006 FLHTCUSE- Hit a deer- Written off
2013 Tri-glide- Sold
2012 BMW K1600GTL- Commuter
2016 FLTRU Road Glide Ultra Limited- Sold
2024 RA1250-SE- CVO Pan America

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32650
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: REDSHIFT 575 CAMS & OTHER PRETTY PARTS
« Reply #304 on: June 28, 2006, 06:31:38 PM »

Quote
hd-dude gets my ride on Monday and I am looking forward to a similar set of
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6709

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: REDSHIFT 575 CAMS & OTHER PRETTY PARTS
« Reply #305 on: July 13, 2006, 11:41:21 PM »

Firedood,
I wish I had the sense to be more conservative .....     [smiley=oops.gif]   sure hope my wife dont see that hehe.

Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32650
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: REDSHIFT 575 CAMS & OTHER PRETTY PARTS
« Reply #306 on: July 14, 2006, 12:02:53 AM »

Quote
Firedood,
I wish I had the sense to be more conservative .....
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6709

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: REDSHIFT 575 CAMS & OTHER PRETTY PARTS
« Reply #307 on: July 14, 2006, 12:10:09 AM »

OUCH .....   I deny everything its the meds talking.
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

Boatman

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4814
  • FLHRSEI.ORG

    • CVO1: 2014 CVO Limited
    • CVO2: 2010 SEUC-accident victim-gone
    • CVO3: 2005 SEEG-traded on 2010
Re: REDSHIFT 575 CAMS & OTHER PRETTY PARTS
« Reply #308 on: October 26, 2006, 02:36:08 PM »

I too have installed the 575's and can highly recommend them to anyone with a 103 motor.  The bike was not dyned before or after.  I am just using my butt dyno.

Before 575's-stock 103 with SE air cleaner, stock exhaust/mufflers, and cartridge download.  The motor ran/started fine cold or hot.  Driveabiliy was good.  What I didn't like- there was not much torque between 2-2400 rpm's..  Everytime I got close to 2,000, I would down shift.

After 575's-103 with SE air cleaner, stock exhaust/mufflers, and cartridge download.  It still runs/starts fine hot or cold.  The big difference is that you have power starting at about 1800 rpm's..  Just twist the throttle and go..  You don't have to downshift now when getting close to 2,000.  Even the touring mufflers have a different note on acceleration-sounds like you have a motor now.

Am set up to have the air fuel mixture checked on Monday on a dyno..  Just want to make sure it is not lean.  If it is, it would be borderline, as it still runs to good with no pops, farts..  Maybe won't have to buy the TMax or Autotune even though I have the bungs installed.

If you want power over 4,000, this cam  is not for you.  If you want a cam that works in the 2-3500 rpm range which most ride in-it does what is advertised.  Thanks Zippers and for all who posted and recommended this cam before me.  Highly recommended.
Logged

HWYMAN1

  • Basic 103
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 906
  • FLHRSEI.ORG
Re: REDSHIFT 575 CAMS & OTHER PRETTY PARTS
« Reply #309 on: November 01, 2006, 01:28:07 PM »

Quote
I too have installed the 575's and can highly recommend them to anyone with a 103 motor.
Logged
Rinehart TD
103 with zipper 575 GD cams
Bitubo rear shocks
Baker DD6 transmission
Traxxion dynamics front end
Stage 1 SE AC

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6709

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: REDSHIFT 575 CAMS & OTHER PRETTY PARTS
« Reply #310 on: November 01, 2006, 01:37:03 PM »


A few things while this is apart .... I would change the throttlebody to a 50mm either Zippers or Horsepower inc.   make sure you get cruise control with it.

In the engine side I would go with a Fueling Oil Pump, I wouldnt skimp so I would also put in new lifters (Fueling or other since your there, Zippers Adjustable Push Rods, and a Zippers Schim.

Whether you go with the standard Air Cleaner or the enlarged one is up to you make sure if you with the larger air cleaner that you get the extended studs :)

I also want to point out that this cam does not die at 4000 rpm's ... look at the dyno's and you will see they carry through past 5000 rpm's

-harry
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

HWYMAN1

  • Basic 103
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 906
  • FLHRSEI.ORG
Re: REDSHIFT 575 CAMS & OTHER PRETTY PARTS
« Reply #311 on: November 01, 2006, 02:18:08 PM »

Quote
A few things while this is apart .... I would change the throttlebody to a 50mm either Zippers or Horsepower inc.
Logged
Rinehart TD
103 with zipper 575 GD cams
Bitubo rear shocks
Baker DD6 transmission
Traxxion dynamics front end
Stage 1 SE AC

Boatman

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4814
  • FLHRSEI.ORG

    • CVO1: 2014 CVO Limited
    • CVO2: 2010 SEUC-accident victim-gone
    • CVO3: 2005 SEEG-traded on 2010
Re: REDSHIFT 575 CAMS & OTHER PRETTY PARTS
« Reply #312 on: November 01, 2006, 02:52:41 PM »

Otophile-
Unbalanced and others know a whole lot more than me.  I didn't do a larger TBI as I still have the stock exhaust/mufflers.  I like others did the Feuling pump, bypass shim, and lifters.  As you are thinking, it's best to do it right the first time.  You will like the results.
Logged

DCFIREMANN

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4812
Re: REDSHIFT 575 CAMS & OTHER PRETTY PARTS
« Reply #313 on: November 01, 2006, 05:14:53 PM »

Quote
A few things while this is apart .... I would change the throttlebody to a 50mm either Zippers or Horsepower inc.
Logged
cvo 1  04 FLHTCSEI  Qrange/Black AKA Ole Punkin
cvo 2 05 VRSCXe Orange/Black sold
cvo 3 02 FXDWG2 Black/Gold 
cvo 4 04 FLHTCSE Blue/Black  sold
cvo 5 09 FLHTCUSE4 Red/Marron sold
cvo 6 12 FLHTCUSE Blue Saphire/Stardust Silver AKA Saphire
cvo 7 14 FLHTKSE  Blaze/Maroon
2020 CVO Limited

PROUD MEMBER EBCM #1.75 Second in command of this great organization

Also has been placed on
TRIPLE SECRET PROBATION

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32650
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: REDSHIFT 575 CAMS & OTHER PRETTY PARTS
« Reply #314 on: November 01, 2006, 05:20:06 PM »

Quote
Have order or on the way most of the parts you mentions, but had questions about throttle body change. Had missed this in previous threads or had true brain fart. Thanks for all the help, John
I have the same setup as was mentioned, and I didn't do the "Throttle Body" change. I'm not at home to see my parts manual but I'm pretty sure that the throttle body is not an "interior" part to the motor. I believe it just bolts up the heads, just like a carburetor would. So if you do decide later to change this you don't have to tear the motor down to do it.

 [smiley=pumpkin.gif]
Ride Safe,
Fired00d
 [smiley=fireman.gif]
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0
Pages: 1 ... 19 20 [21] 22 23 ... 26
 

Page created in 0.239 seconds with 25 queries.