www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: air cleaners  (Read 1011 times)

0 Members and 1 Guest are viewing this topic.

buckeye bulldog

  • Enjoy Life!!
  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 92
  • Go Browns!!
air cleaners
« on: February 16, 2011, 02:05:28 PM »
I'm looking for an air cleaner that will give me more power. Any suggestions!
Logged
2010 Street Glide FLHX

bisounours

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 7384

Re: air cleaners
« Reply #1 on: February 16, 2011, 02:45:21 PM »
You've  Power Commander III and True Dual Rineharts
I'm surprised you've not a big sucker or similar ! :nixweiss:


And you look for a big sucker in the WTB section !
« Last Edit: February 16, 2011, 02:47:37 PM by bisounours »
Logged
********2007 FLHTCUSE2 Red/Black**********
 
     2008 FLHTCUSE3, White Frost and Silver Mist
             
                  2011 FLHXSE2, Stage1

2013 FLHRSE5   Crushed Sapphire with Cold Fusion GraphicsCrushed Sapphire with Cold Fusion Graphics

Talon

  • Life is like a jar of jalapenos, what you do today may get you in the a$$ tomorrow!
  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4072
Re: air cleaners
« Reply #2 on: February 16, 2011, 03:04:16 PM »
Doherty Power Pacc!  :2vrolijk_21:

www.dohertymachine.com/
Logged

hogsty

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 320

    • CVO1: 2011 FLHTCUSE6
Re: air cleaners
« Reply #3 on: February 16, 2011, 07:43:44 PM »
Does the Power Pacc come with the externally vented breathers or did you do that yourself?
Logged

Talon

  • Life is like a jar of jalapenos, what you do today may get you in the a$$ tomorrow!
  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4072
Re: air cleaners
« Reply #4 on: February 17, 2011, 07:54:24 AM »
Comes with breathers, that's not my bike, that's just a net picture I puled. You can use you stock A/C cover, but I run mine open element. I had the end plate powder coated and have a billet insert for the stock AC on the end. Below is a picture of mine, I have tubes routed back into the AC. It's a nice unit, I really like it.
« Last Edit: February 17, 2011, 07:56:31 AM by Talon »
Logged

SG Racer

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1636

    • CVO1: 2011 SESG2, Black Diamond/ Inferno Orange
    • CVO2: 2005 SEEG, Cherry
Re: air cleaners
« Reply #5 on: February 17, 2011, 08:00:04 AM »
That is a really nice looking air cleaner set up. .
 Ray
Logged
D&D Fat Cat W/Ghost pipe
Custom leather seat
12" Yaffe Monkey Bagger Bars
SEPST
93Hp, 116Tq

Talon

  • Life is like a jar of jalapenos, what you do today may get you in the a$$ tomorrow!
  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4072
Re: air cleaners
« Reply #6 on: February 17, 2011, 08:21:57 AM »
Quote from: sgracer on February 17, 2011, 08:00:04 AM
That is a really nice looking air cleaner set up. .
 Ray

Thanks, I can take credit, someone else on this site gave me the idea to powder coat the end cap and use the AC insert on the end, but it did come out nice. It only cost me 410 to have it powder coated because I used a black that they run all the time, so they just added it to one of their runs. You do need to make a spacer that goes between the AC insert and the black end cap, there's a gap there and if you tighten down on the center screw it can add stress to the nut welded to the end cap. I just put modeling clay around the hole in the end cap and screwed the AC insert down snug then removed it and measured the thickness of the clay. Then I had a buddy cut a spacer on his lathe, you could use several washers instead.

Craig
Logged
 

Page created in 0.215 seconds with 21 queries.