Sorry I haven't been around much guys but my time has been spread pretty thin. Some of you guys know where I am and why. I've also been in and out of the Hospital and am going back in this Wednesday for more surgery. It's all good, just taking up a lot of my time and there's the recovery part.
You guys with the 2010 ConV that use the TTS tuner. I have an announcement for you. Mr. Cole has asked me to work with him on the testing of a new calibration for us. It's mainly the fix of the 6th gear light with the use of the proper Primary Ratio of 1.353.
I have it flashed in ours. Seems to sound different and the throttle has more pep.
I have been authorized to send this new file to anyone that wants it as long as they have a 2010 ConV. If you send me a PM with your email addy I will do just that. You must report back here that you in fact did install this new improved calibration and let me know if the 6th gear light does work properly. Not a bad catch if I do say so. You may VTune this file after you see the 6th gear light working. If it doesn't work then it's your choice to keep this file, or reinstall your calibration.
So, If anyone would like to have it and test it for TTS, shoot me a PM.
EDIT: I should mention that this calibration is set up for a stock 110 CVO with slip-on's. It can be used for about any combination of exhaust but is for the 255 stock cams.
thx
-wiz