Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Daddywarbucks]

I have heard that this bike has the ability to add the harness and 02 sensors...anyone done it? I got true duals from V&H and am getting the tts mastertune I will do cams before long...sooooo anyone???

[Unbalanced]

Only if you have an 05 ECM .. if you have an 04 ECM it won't work.  I did it on my 05 SEEG

[mjb765]

Revolution Performance EMS tuner and the upgrade to the 05 and later ECM....just a thought......

http://revperf.com/Precision/index.html

[Daddywarbucks]

Only if you have an 05 ECM .. if you have an 04 ECM it won't work.  I did it on my 05 SEEG

Tell me your process if you dont mind..is it cost effective?

[hogasm]

Tell me your process if you dont mind..is it cost effective?

If you are planning on upgrading your bike a piece at a time then the RP EMS is definitely the way to go

If you are a tinkerer then the TTS is for you

O2 sensors are a breeze  just run the front harness along the frame to the rear along with the rear brake line
                                       rear sensor just tucks over the starter

For the RP EMS you will need a 05 ECM

Is the RP EMS worth it....

try this link for questions on the RP EMS    www.revperf.com

[Unbalanced]

After it was all said and done I don't believe it was cost effective, but I wanted the new maps over the old SERT maps and figured while in there why not make the most of the close loop if it was only some wiring and 2 sensors.  Latest greatest so to speak. .  

I did the ecm check with Steve Cole and it passed so I moved forward and upgraded my SERT to a TTS for the 100.00.   Steve Turned the SERT in like 5 business days or less at the time.

So while we waited for the TTS to come back we ordered the correct color coded wire (which again takes time to get) , could we have used other wire I am sure, but figured do it right.  Then ordered the 2 sensors.   Then I had to remove the pipes as the bung plugs wouldn't come lose so, off go the pipes.   Gotta wonder why they didn't put in any anti seize /bang head.   (Note to self new pipes put in antiseize before installing)   While the pipes were off the we wired up the sensors which just made it a little easier .   Put in new exhaust gaskets and put the pipes back on.   About 5 hours later it was done.

In the end, I believe I could have gotten an equal tune from Doc in Open Loop and never had to worry about a sensor going bad or the labor and costs associated with the sensors.   What I did gain though was the new maps, the  V-Tuning and unless I would have changed something I doubt I would have had to go back and use the VTune portion.  

[Daddywarbucks]

Thanks guys...can of worms......BIG can of worms...I dont think there is a good spot to stop..but I see 2500 going into the bike real fast....an i think that would be a good start..sigh....

[mjb765]

Thanks guys...can of worms......BIG can of worms...I dont think there is a good spot to stop..but I see 2500 going into the bike real fast....an i think that would be a good start..sigh....

Then you fall into the "while we are at it let's do this" syndrome...hang on to your wallet.