Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[TIF2]

For those doing audio and speaker upgrades to the SESG2, here are the male connector parts needed to use the factory speaker leads. Thanks to Black Diamond for providing the pics in a different post. The connector family is a Delphi GT 150, with the speaker leads being the female and the new connector being the male. These are for the speakers that are installed, the additional capped lead "labled "rear speaker" in service manual) is different (Tyco Superseal). To make your own leads, here are the Delphi part numbers needed (all are available from www.mouser.com):

15355466
2PIN MALE BLK CONN ASSY

15305351
LOOSE CABLE SEAL (2 per connector)

15305024
SECONDARY LOCK (1 per connector)
 
15355563
MALE GT 150 TIN TERMINAL (2 per connector)

Connector on speaker:



Female interface on bike:



Part numbers above are for the connector shown here:



Thought folks might find this handy. Connectors are about $3 each (for all parts) if you build them yourself.
Thanks again to Jeff for supplying great shots for reference.

[nuckelhead]

thanks so much for posting this!

[Black Diamond]

Glad the pics helped but you did a much better job of explaining things than I ever could!

JW