Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[smkblwr]

Anybody running there led turn signs front and rear, along with a run brake turn modual? which bulbs are you useing, 1156 or 1157 in the rear?

[Boatman]

I am running the 1157 2 prong in the front and 1156 single prong custom dynamics LED's (front/rear) with a Kuryakyn run brake controller and everything works fine.   Already had the Kuryakyn controller before I bought the CD lights.  The CD led's are much brighter than Kuryakyn LED's I removed.

[Twolanerider]

Anybody running there led turn signs front and rear, along with a run brake turn modual? which bulbs are you useing, 1156 or 1157 in the rear?

You don't have a choice.  The sockets in the rear signal housings are single pin (1156).  So a single pin 1156 style bulb is what you must plug in there.

[smkblwr]

thanks guys, thats what i thought, i am running the CD RBT and equilizer boxs just it seems that the running lights are the same intensity with the brake on as without. Boatman are yours the this way or are they dimmer in the running light and brighten up when the break is applied.

[Boatman]

Boatman are yours the this way or are they dimmer in the running light and brighten up when the break is applied.

Just as you stated, dim as running lights and bright as turnsignals/brake lights.

[smkblwr]

Boatman are you getting any static though the radio and or cb when the turn signals are on. my does it. CD says it happens with the CVO because of the amp. They have a coating for the stablizer that some times work to get rid of the RF interferance.

[Boatman]

Boatman are you getting any static though the radio and or cb when the turn signals are on. my does it. CD says it happens with the CVO because of the amp. They have a coating for the stablizer that some times work to get rid of the RF interferance.

Don't use the CB but there is no static thru the radio.  Several people have used the custom dynamic module and had your problem on this site.  CD's is aware of the issue but have no current solution.  (From what I have read on here-no actual contact with them).

[guppytrash]

Boatman are you getting any static though the radio and or cb when the turn signals are on. my does it. CD says it happens with the CVO because of the amp. They have a coating for the stablizer that some times work to get rid of the RF interferance.

Been there with the signal stabilizer.  Static with every flash of the turn signal.  Sent back the first stabilizer for the RF coated one.  NO help.
CD blames it on the CVO amp, but from others here that is bs.  
Check out this thread:  http://www.cvoharley.com/smf/index.php?topic=60777.0  or search Signal stabilizer
CD was kind of irritating to talk to about this as they acted like they just couldn't understand it...they just have not had this problem before.