www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Twin Tec EFI Controller  (Read 1511 times)

0 Members and 1 Guest are viewing this topic.

TexTaz

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 53
Twin Tec EFI Controller
« on: May 11, 2006, 05:16:43 PM »
Has anyone had any experience with this system ?   It's a closed loop system with twin O2 sensors.   Doesn't require dyno tuning and constantly adjusts for conditions.  Steep price to start with but sounds like it migh be the way to go.

http://www.daytona-twintec.com/TCFI.html

Did I read somewhere that Rinehart is now offering headers with the O2 sensor bung built in?
Logged
"06 FLHTCUSE
Upgrades TBD

HDMonsterTorque

  • Newbie
  • *
  • Offline Offline
  • Posts: 37
Re: Twin Tec EFI Controller
« Reply #1 on: May 18, 2006, 04:21:08 PM »
We just installed our first kit. Very straight forward. Just read the manual a few times before you start.
Check every connection twice (we managed to swap rear and front sensor......).
It looks to be running very good. We tested it on a dyno. Nu real world riding yet. But it did feel good on the dyno.

Now the ECU should learn the AFR by just riding it.

If it works as advertised the price is worth it.

Logged

TexTaz

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 53
Re: Twin Tec EFI Controller
« Reply #2 on: May 18, 2006, 06:21:06 PM »
That's good to hear.  I was starting to worry when no one replied with any experiences.
What pipes are you running ?   Any other mods ?   What kind of dyno #'s did you see ?
Logged
"06 FLHTCUSE
Upgrades TBD

HDMonsterTorque

  • Newbie
  • *
  • Offline Offline
  • Posts: 37
Re: Twin Tec EFI Controller
« Reply #3 on: May 19, 2006, 03:20:52 PM »
TexTaz:

2005 Roadking
95ci
Keith Black flattops
Ported heads with stock valves
10:1 cr
Wood TW6HG
White Brother 2in1, 16 discs + closed endcap
K&N HD-0700 big airfilter

99hp and 115ftlbs after only 3 100% acceleration runs on the dyno!


Logged

TexTaz

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 53
Re: Twin Tec EFI Controller
« Reply #4 on: May 19, 2006, 03:41:43 PM »
You ain't messin' around are you.  Those are nice numbers and good looking curves on the dyno.
Logged
"06 FLHTCUSE
Upgrades TBD

475wildey

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 78
  • FLHRSEI.ORG
Re: Twin Tec EFI Controller
« Reply #5 on: May 21, 2006, 07:08:06 PM »
Quote
You ain't messin' around are you.  Those are nice numbers and good looking curves on the dyno.

Courious ... no afr table on that chart???
Logged
2005 fxdwg              
124 S&S                  
B2 heads                  
640 S&S cams    

HDMonsterTorque

  • Newbie
  • *
  • Offline Offline
  • Posts: 37
Re: Twin Tec EFI Controller
« Reply #6 on: May 23, 2006, 11:47:31 AM »
No AFR graph, you are correct.
We only used the DTT datalog software at that time.

Hopefully we will be able to put it on the dyno again after it made some miles.
We will use the dyno AFR during those runs.
Logged

kng103

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 534
  • 2004  SE-103          ROAD KING CLASSIC
Re: Twin Tec EFI Controller
« Reply #7 on: May 23, 2006, 02:07:35 PM »
Quote
TexTaz:

2005 Roadking
95ci
Keith Black flattops
Ported heads with stock valves
10:1 cr
Wood TW6HG
White Brother 2in1, 16 discs + closed endcap
K&N HD-0700 big airfilter

99hp and 115ftlbs after only 3 100% acceleration runs on the dyno!



thats one hairy 95" build!!
Logged

2004 flhrci se-103 pearl white
bassani true duals w/ho mufflers
se air cleaner
sert
se-251 cam
s&s reed valve
24/37 gearing
se-6 sp
rumble road speakers
2008 lincoln mark lt(silver)
 

Page created in 0.218 seconds with 21 queries.