Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[spepin]

Because the bike is parked right below the reciever I can see and hear it working everytime i flick the highbeams, but the opener will not work. I just noticed that the lights on the opener come on (they come one when you open the door, but its as if the signal from the HD box is not long enough to kick the opener into operation. I also noticed that the wall mounted control panel which has an LED display for time and tempurature (like that matters) dims when I flick the Bike's HB switch... so I know there is a signal going to the opener... it's just not doing anything.

has anyone else had issues with a new chamberlain Elite opener??? Did you find a fix?

The problem is with the new "intelligent" controls that Chamberlain, Liftmaster and Craftsman Assurelink are using.  See this post for the solution:

http://www.cvoharley.com/smf/index.php?topic=93238.0

[hotroadking]

Replace the door button with a standard door switch

My sears had the smart logic keyboard with led the HD unit did the same thing.

Replace the smart switch and problem solved


Sent from my iPhone using Tapatalk

[spepin]

There is voltage on those wires to drive the display and other circuitry in the wall controls. While it may open the door, it is not a good (read: correct) way of doing it. You're essentially shorting out the power supply line for the smart controls. Also, by eliminating the smart wall control, you lose the intelligence that is built in, as well as the ability to program/learn remotes from the wall.  If your opener is still under warranty, then you've also just voided it. Besides, most people won't want to give up those conveniences.

[hdnik]

Isn't the convenience of an automatic garage door opener enough for us anymore? My goodness get a basic button and enjoy opening the door with a switch on your handlebars and get happy... At least thats how I feel anyway. Next I'll tell ya how I had to walk to and from school uphill in the snow lol


Sent from my iPad using Tapatalk

[grc]

There is another relatively simple way to do this without costing anything other than your time and a little solder.  One of the guys even posted a photo or two of the simple connections to the circuit board in that fancy wall control that will activate the opener with the H-D receiver while maintaining the other functions. 

Personally, I like using the remote that came with the new opener.  It has much longer range than the Harley option, is much more reliable (don't have to press the button multiple times to get a response), and all it cost me was the price of a simple pushbutton momentary switch I added to the dash and wired to the remote I hid in the fairing.

Jerry

[spepin]

There is another relatively simple way to do this without costing anything other than your time and a little solder.  One of the guys even posted a photo or two of the simple connections to the circuit board in that fancy wall control that will activate the opener with the H-D receiver while maintaining the other functions. 

Have you considered that maybe some folks don't feel comfortable soldering small wires to smaller components?  Maybe they don't have the necessary skills or tools to do that?  This is a plug-n-play solution that requires no cutting, soldering or tools to use.

[grc]

Have you considered that maybe some folks don't feel comfortable soldering small wires to smaller components?  Maybe they don't have the necessary skills or tools to do that?  This is a plug-n-play solution that requires no cutting, soldering or tools to use.

Yes, I'm fully aware that some people aren't familiar with soldering wires or working on circuit boards.  My comment is for those who are, or who know someone who is and will help them.  A simple and basically free solution is usually welcomed by many; for those without the skill or desire to attempt the free fix we have folks like you who will sell them something.  I'm not trying to pass judgment, just trying to present alternatives.

Jerry

[spepin]

just trying to present alternatives.

That's all I was trying to do as well.  This thread already had your solution posted - I was just providing a plug-n-play solution for those either uncomfortable with the DIY solution, those who don't want to void their warranty or those who wish to retain the features of the intelligent wall control.

[grc]

Here is the post with photo I mentioned previously.  Very simple for anyone familiar with soldering, isn't likely to void any warranty (other than for the circuit board if you somehow manage to screw it up of course).

http://www.cvoharley.com/smf/index.php?topic=74206.msg1125546#msg1125546

Jerry

[Para Bellum]

Yes, I'm fully aware that some people aren't familiar with soldering wires or working on circuit boards.  My comment is for those who are, or who know someone who is and will help them.
Jerry

X2.  Most people know whether or not they have the knowledge to do it, so the basically free solution is a great thing to pass along.

I was just providing a plug-n-play solution for those either uncomfortable with the DIY solution, those who don't want to void their warranty or those who wish to retain the features of the intelligent wall control.

We understand that part already, but no need to poke at someone who provides the free solution.

[hdnik]

This old school method is excellent, not free, but all you have to do is honk your horn a few times until the

[Rooster]

Someone posted a video like this where the guy pulls up honks and the wife comes out and opens the GD. If I did that I could probably look at the window and find Mrs R flipping me the bird. HaHa

[hdnik]

Someone posted a video like this where the guy pulls up honks and the wife comes out and opens the GD. If I did that I could probably look at the window and find Mrs R flipping me the bird. HaHa

Yes... its a UK Model, but I'm sure it's available in some places in North America!

[Rooster]

That's the one

[Fired00d]

Someone posted a video like this where the guy pulls up honks and the wife comes out and opens the GD. If I did that I could probably look at the window and find Mrs R flipping me the bird. HaHa

That's the one

I want someone to video you when you try that... my guess is you'll get more than "flipping me the bird"... I know I would if I tried that w/Mrs. d00d.

 
Ride Safe,
Fired00d