Made the drive to Franklin Indiana this morning, to complete Hydraulic Service and sales inc. They were waiting for me and quickly loaded my lift into my pickup with a fork lift. It was 108 miles up so it cost me about $50 gas for the round Trip. They refunded my shipping fee and did not charge me Tax! Sweet! The lift was well packed. Everything was there and was easy to assemble. I unloaded it with my BSR Beefie a floor jack, dolly, some boards and some hillybilly know how!
I like the lift.
Looks nice and is beefy.
I first put my bike on and then noticed I did not put the extension on.
I took off the bike.
Removed the vice and installed the extension into the short position.
Then reinstalled the vice.
Put the bike on and you can see from the pictures that the rear wheel is past the drop out panel.
So I took the vice off and took the extension off, then reinstalled the vice. Enough!
You don't need the extension unless you have a long bike or chopper.
It will take a over 100" bike with extension all the way out.
Put that in the garage with the side for future use.
Stored the side extensions for future use.
Here are some pictures.
Author
Topic: Blew my wad on a new table lift right or wrong (Read 21706 times)