Props to the vendor for providing an alternative to HD's typically over-priced audio accessories.
And props to hd-dude for the pictures and installation information, especially the install above the CB and XM modules on the CVO Ultra.
A couple of observations: (1) the current product with the male-male 35 wire connector is what's needed for HK radios w/o an existing 35 wire connector on the bike; i.e. OEM Street Glides, Electra Glide Classics, etc.; which excludes the CVO models, all of which have a 35 wire connector (28B) connected to the HK radio--on CVO bikes the current male-male connector adds an additional bundle of unnecessary wires; and, (2) on a CVO, no separately purchased harness is required for the HD Ipod accessory since the accessory includes a harness for installation--a separately purchased harness is only required for installation on bikes not equipped with the 35 wire connector, 28B connector (e.g. non-CVO Street Glides, Electra Glide Classics, etc.) and the harness is the $20, p/n 69200033--the $110 harness referenced by the OP isn't used for the HD Ipod accessory installation.
Iron Cross Audio did a side-by-side comparison of the aftermarket Ipod module with HD's module. Contact Tony for details:
http://www.ironcrossaudio.com/ipod-harleydavidsonradio.htmlThanks, again, to hd-dude for the thread, pics, and information.
Carl