www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3] 4 5 ... 10  All

Author Topic: SOMETHING TO WATCH ..STAGE III BUILD,IN PROCESS...  (Read 14893 times)

0 Members and 1 Guest are viewing this topic.

slacker2

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 142
  • Work Hard...Play Hard.
    • VT


    • CVO1: V&H 2/1 ProHighOUTPUT pipe,58mm,10.5 high dome pistons, Hillside heads, RS A/C 625 S&S cams.LED headlight and drivers.
Re: SOMETHING TO WATCH ..STAGE III BUILD,IN PROCESS...
« Reply #30 on: February 17, 2012, 06:59:08 AM »
 LIKING WHAT I'm HEARING !!!!

 Joe called me yesterday and thou he is not done yet....liking the numbers...
dyno sheets coming soon.
Logged
Flying with the Eagles.
Stage III build by Palmer Brothers, DirectLink tuned by Joe's Cycles. One Happy Happy Bike.133T 140hp's

FAST380

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 801
    • CA


    • CVO1: FLHXSE2 . . . . . Fullsac X-Pipe - 2.25" baffles - Fueling 574 Cam's - TTS Tuner - 30 Tooth Pully W/Stock Belt- Wild One 575 Bars - Chrome Inner Primary - Kuryakyn Plate frame 9182 - Diamond Engineering Polished SS Bolt Kit - 8" Windvest - Black Agitator
Re: SOMETHING TO WATCH ..STAGE III BUILD,IN PROCESS...
« Reply #31 on: February 17, 2012, 12:43:03 PM »
OK, now you guys are just teasing us  :soapbox: How many more posts about the number are coming, the numbers are sounding good..... Post the numbers already  >:(

Just funnin ya  :2vrolijk_21:
Logged

slacker2

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 142
  • Work Hard...Play Hard.
    • VT


    • CVO1: V&H 2/1 ProHighOUTPUT pipe,58mm,10.5 high dome pistons, Hillside heads, RS A/C 625 S&S cams.LED headlight and drivers.
Re: SOMETHING TO WATCH ..STAGE III BUILD,IN PROCESS...
« Reply #32 on: February 17, 2012, 12:49:10 PM »
 Scott,
I'll post the dyno sheets as soon as Joe emails them up to me.
You guys did the work...so anytime you want, you go ahead and let
lose with the numbers you have my blessing.
 THANKS for the GREAT work...~Steve :P
« Last Edit: February 17, 2012, 05:48:14 PM by slacker2 »
Logged
Flying with the Eagles.
Stage III build by Palmer Brothers, DirectLink tuned by Joe's Cycles. One Happy Happy Bike.133T 140hp's

slacker2

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 142
  • Work Hard...Play Hard.
    • VT


    • CVO1: V&H 2/1 ProHighOUTPUT pipe,58mm,10.5 high dome pistons, Hillside heads, RS A/C 625 S&S cams.LED headlight and drivers.
Re: SOMETHING TO WATCH ..STAGE III BUILD,IN PROCESS...
« Reply #33 on: February 17, 2012, 12:51:37 PM »
 Thanks to all for the Patience....think it was tough on you guys waiting :confused5:
Logged
Flying with the Eagles.
Stage III build by Palmer Brothers, DirectLink tuned by Joe's Cycles. One Happy Happy Bike.133T 140hp's

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085
Re: SOMETHING TO WATCH ..STAGE III BUILD,IN PROCESS...
« Reply #34 on: February 18, 2012, 07:00:15 AM »
Quote from: FAST380 on February 17, 2012, 12:43:03 PM
OK, now you guys are just teasing us  :soapbox: How many more posts about the number are coming, the numbers are sounding good..... Post the numbers already  >:(

Just funnin ya  :2vrolijk_21:

That paint scheme on your bike, is a real eye-catcher. :2vrolijk_21:
I've gotta' get out of the shop more often........... :D :D
Scott
Logged

slacker2

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 142
  • Work Hard...Play Hard.
    • VT


    • CVO1: V&H 2/1 ProHighOUTPUT pipe,58mm,10.5 high dome pistons, Hillside heads, RS A/C 625 S&S cams.LED headlight and drivers.
Re: SOMETHING TO WATCH ..STAGE III BUILD,IN PROCESS...
« Reply #35 on: February 20, 2012, 09:51:29 AM »
  To those who were waiting ... Hillside and Joe's Cycle have put together a package that is showing
a minimum of 133 and 140 hp's. I will post sheets when I get them. :coolblue:
Logged
Flying with the Eagles.
Stage III build by Palmer Brothers, DirectLink tuned by Joe's Cycles. One Happy Happy Bike.133T 140hp's

FAST380

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 801
    • CA


    • CVO1: FLHXSE2 . . . . . Fullsac X-Pipe - 2.25" baffles - Fueling 574 Cam's - TTS Tuner - 30 Tooth Pully W/Stock Belt- Wild One 575 Bars - Chrome Inner Primary - Kuryakyn Plate frame 9182 - Diamond Engineering Polished SS Bolt Kit - 8" Windvest - Black Agitator
Re: SOMETHING TO WATCH ..STAGE III BUILD,IN PROCESS...
« Reply #36 on: February 20, 2012, 11:07:59 AM »
VERY NICE!!
Logged

barefoot3zk5

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 620
  • I used to be a KRYPTO.. Now I'm 1 OF 1

    • CVO1: 2011 FLHXSEII Dragula 2/1 exh.. Performance Mach airbox..Metalsports 26" front wheel w/6piston singleside brake 13" rotor and matched 18" rear 200 tire..TTS tuner by DOC .. Woods cams and Hi comp pistons.. 600 LEDs hidden PLUS, SONY head unit and gauges all green LEDs to match,500watt ARC amp w/4 Focal6.5 spkrs,Install by Peter @SOUNDZ .. Yafee tag frame . chrome inner/outer primary. greeen gator seat/backrest ..major engine mods 125+ HP and powder coated heads/cyl and diamond cut. homemade rear air suspension
Re: SOMETHING TO WATCH ..STAGE 111 BUILD,IN PROCESS...
« Reply #37 on: February 20, 2012, 12:00:15 PM »
Quote from: Lever on February 07, 2012, 08:38:58 PM
yea during my build  my crank runout was aprox .005  with aprox 7,000 miles after darkhorse magic  my crank runout is .001  :orange:
Lever . after rereading this thread I'm thinkin perhaps your  build runout may have been .0005.. (5/10thou) from darkhorse.. and after running , currently .001.. .. Ya Think ??
Logged

Lever

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1482
  • keep the rubber side down
Re: SOMETHING TO WATCH ..STAGE III BUILD,IN PROCESS...
« Reply #38 on: February 20, 2012, 12:11:56 PM »
my crank run out was five thousandths before i sent it off to dark horse   when it came back  it was checked again and now the crank run out is aprox  one thousandths
Logged
2010 CVO Convertible  crimson red sunglo/Autumn Haze with Metal Grind Graphics
2014 113  motor 10.8 compression
SAE smoothing #5  125.7 hp / 122.9 tq
2017 Road King M8
stage IV

barefoot3zk5

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 620
  • I used to be a KRYPTO.. Now I'm 1 OF 1

    • CVO1: 2011 FLHXSEII Dragula 2/1 exh.. Performance Mach airbox..Metalsports 26" front wheel w/6piston singleside brake 13" rotor and matched 18" rear 200 tire..TTS tuner by DOC .. Woods cams and Hi comp pistons.. 600 LEDs hidden PLUS, SONY head unit and gauges all green LEDs to match,500watt ARC amp w/4 Focal6.5 spkrs,Install by Peter @SOUNDZ .. Yafee tag frame . chrome inner/outer primary. greeen gator seat/backrest ..major engine mods 125+ HP and powder coated heads/cyl and diamond cut. homemade rear air suspension
Re: SOMETHING TO WATCH ..STAGE III BUILD,IN PROCESS...
« Reply #39 on: February 20, 2012, 12:25:03 PM »
Quote from: FAST380 on February 17, 2012, 12:43:03 PM
OK, now you guys are just teasing us  :soapbox: How many more posts about the number are coming, the numbers are sounding good..... Post the numbers already  >:(

Just funnin ya  :2vrolijk_21:
Yeh .. what he said ..  How long do it take to tune one of them top producers ?? show me somethin .. LOL :nixweiss:
Logged

slacker2

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 142
  • Work Hard...Play Hard.
    • VT


    • CVO1: V&H 2/1 ProHighOUTPUT pipe,58mm,10.5 high dome pistons, Hillside heads, RS A/C 625 S&S cams.LED headlight and drivers.
Re: SOMETHING TO WATCH ..STAGE III BUILD,IN PROCESS...
« Reply #40 on: February 20, 2012, 12:37:52 PM »
Tuner is telling me that Ill have the dyno sheets by 4pm today....133,140hp.
Logged
Flying with the Eagles.
Stage III build by Palmer Brothers, DirectLink tuned by Joe's Cycles. One Happy Happy Bike.133T 140hp's

Lever

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1482
  • keep the rubber side down
Re: SOMETHING TO WATCH ..STAGE III BUILD,IN PROCESS...
« Reply #41 on: February 20, 2012, 01:29:29 PM »
those are some great #'s   grats  :orange:
Logged
2010 CVO Convertible  crimson red sunglo/Autumn Haze with Metal Grind Graphics
2014 113  motor 10.8 compression
SAE smoothing #5  125.7 hp / 122.9 tq
2017 Road King M8
stage IV

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50549
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: SOMETHING TO WATCH ..STAGE III BUILD,IN PROCESS...
« Reply #42 on: February 20, 2012, 01:57:02 PM »
Quote from: slacker2 on February 20, 2012, 12:37:52 PM
Tuner is telling me that Ill have the dyno sheets by 4pm today....133,140hp.

Just read back a bit.   This is a 110 with a 625 cam set, moderate compression bump, tb and head work?
Logged

slacker2

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 142
  • Work Hard...Play Hard.
    • VT


    • CVO1: V&H 2/1 ProHighOUTPUT pipe,58mm,10.5 high dome pistons, Hillside heads, RS A/C 625 S&S cams.LED headlight and drivers.
Re: SOMETHING TO WATCH ..STAGE III BUILD,IN PROCESS...
« Reply #43 on: February 20, 2012, 02:04:39 PM »
Thanks Lever..that was the min. numbers..he was showing a couple of runs @142hp.
We talked it over and decided to go with final numbers of 132T and 140hp that he
can pull consistently and support with sheets.
Logged
Flying with the Eagles.
Stage III build by Palmer Brothers, DirectLink tuned by Joe's Cycles. One Happy Happy Bike.133T 140hp's

slacker2

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 142
  • Work Hard...Play Hard.
    • VT


    • CVO1: V&H 2/1 ProHighOUTPUT pipe,58mm,10.5 high dome pistons, Hillside heads, RS A/C 625 S&S cams.LED headlight and drivers.
Re: SOMETHING TO WATCH ..STAGE III BUILD,IN PROCESS...
« Reply #44 on: February 20, 2012, 02:06:56 PM »
Yes , twolaner...the combo of the head work with the 625 S&S cams were a first for Hillside.
Logged
Flying with the Eagles.
Stage III build by Palmer Brothers, DirectLink tuned by Joe's Cycles. One Happy Happy Bike.133T 140hp's
Pages: 1 2 [3] 4 5 ... 10  All
« previous next »
 

Page created in 0.173 seconds with 24 queries.