Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[sol y sombra]

I just bought the sgse from 2011 she came with the original alarm, i still have the remote pager from my Fatboy se 2006 and i would like to install the remote pager on my brandnew sgse 2011 but i don't have any manual of it. It is the pager with the slider button with 3 positions OFF ON without sound only vibration and ON with sound. When i put ii ON i see the letter P and after then 4 (could also be d and h)
Can anybody help me out here?
Thanks

[sol y sombra]

This is the pager i have

[kiwihog]

Although the SG has the smart security system it does not have the H-D® Security System Smart Siren II here is the  part you need Note the antenna wire ,, I went thru this last year with my dealer   http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524442031587&FOLDER%3C%3Efolder_id=2534374309435053&ASSORTMENT%3C%3East_id=2534374309435053&locale=en_US&bmUID=1327342335269&bmLocale=en_US
hope this helps

[sol y sombra]

Thanks Kiwihog but i do have that she came with it. I saw that the letters when putting on ON are h and d ? I think i have to pair it but HOW?

[kiwihog]

the new pagers look different to that one I have the same thing on my 07 Deuce and also my 2011 fltruse and I have 2 pager / receivers the rechargeable one and the one that takes the coin battery neither of those look like the one in your picture I'm thinking they may have changed the system after 06
After I picked up my R/G I asked the parts guy at my Dealer if my bike had the system that would work with the pager he said yes it does so that was when I got the rechargeable pager spent hours trying to link it to my bike finally gave up and while it was in for its 1000 mile service told them it wouldnt link up the tech spent a further 45 minutes and couldnt do it finally they went to the manual and realised that it only has the security system not the smart system II I bitched a bit and they swappedit out and installed the one with the antenna and it works as I was expecting (cool thing was they did it no charge) can you believe that...

[sol y sombra]

  so i think i will also have the simply siren too (without that wire) What now i dont think my dealer will swapp it

[kiwihog]

yeah I was lucky ..used the fact that I had purchased the new rechargeable pager fob that was not going to work on the word of their parts guy they gave in and gave it to me including install they are simple to install and I would recommend getting the rechargeable fob The battery powered one only lasts about 4 days and needs new battery

[kiwihog]

looks like the system runs about $90-$100 and the rechargeable fob $80 USD

[sol y sombra]

it is strange that the pager does vibrate when the alarm goes off but no sound ??

[kiwihog]

I did just notice on line they state approved for the USA maybe they supplied a different one for your market ... I'll track down the instructions for the one i have it may help or not .. BRB

[kiwihog]

Sorry all I could find was the install instructions for the security system II  I put on the Deuce  no info on how to link fob to system I do remember it had to do with holding down one of the buttons on the pager fob wait for a beep turn on the ignition press button again wait for beep turn off ignition fob would beep 4 times indicating pairing or something like that ...lol     hope I dont have to do it again soon pretty vague

[sol y sombra]

thanks, i will try it out tomorrow. I hope it will work. Thanks again

[sol y sombra]

I am still not done with this issue.this is the remote pager i have and smart siren N°68958 . I checked everything and i am sure that It worked fine on my fatboy cvo from 2006,and the siren i have on my sgse is the same alarmsystem. I just cant get it paired with my pager it has a sliding switch with 3 pos OFF  -  Vibr without sound  and Vibr with sound, i also can push the sliding switch in and then 1bar appears. When i put it on the letters hd appears it chirps a few times and thats it. Does anyone know what i have to do so that it will work again on my new sgse 2011.
Thanks in advance