Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[muddypaws]

What do I need to do to make my corner lights on my tour pack work as turn lights?

[JDOFLHRIDER]

http://www.cvoharley.com/smf/index.php?topic=52833.0

[gabhart]

Did the harness we spoke about get delivered yet?

[SE66]

http://www.ridetimetechnology.com/

[SE66]

Very easy to install their system, and it works great.

[gabhart]

SE66, plug and play inside the Tour Pak?

[SE66]

 Plug and Play.  I also installed the ULTRA PRO PROGRESSIVE SCAN
LED TOUR-PAK TAIL LIGHTS.  This really is a Great Improvement to the back of the bike.  Very easy installation.  All plug and Play.  only have to drill 2 holes.

JImmy

[T-Hawk]

Very easy to install their system, and it works great.

I got the ridetimetechnology kit, thinking as it stated it was a simply plug-n-play kit... only to find I had to disassemble a wiring block to trade wires into their wiring block.

Not really all that difficult, but take your time and it will work as described.

Turn signals in both corners, and extra brake lights.  If you are running led bulbs front and rear, you most likely already have a load stabilizer... there are instructions for such in the kit, just don't freak out like I did after everything was put together as instructed.  I forgot about the re-sync due to the stabilizer and when everything started flashing really fast, I thought I had done something wrong.  After installing the kit, just go back through the process of syncing the led bulbs and your done.