Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[SDCVO]

The closest they have (no part number) is "Haloz turns" under "turn signal>Harley" probably it but a pain to return if incorrect

[UFO_HOG]

The closest they have (no part number) is "Haloz turns" under "turn signal>Harley" probably it but a pain to return if incorrect

They should be $95.99 and you have to pick between bullet or flat style, but I'm pretty sure that's the ones.

Just looked them up, that's them...

[SDCVO]

thanks!

[Rio]

very cool, $200 front and rears eh?

[SDCVO]

Just ordered, thanks again!

[Rio]

are they for the front turn signals only??

[Fired00d]

very cool, $200 front and rears eh?

Don't think you can run those in the rear being white/amber combination... if you want turn signals to run all the time in the rear I believe the bulbs have to be red or at least a red lens (not clear/smoked). Think you'd have to use the "Dogeye turn signal" in the back. The bulbs for front and rear are different sockets 1157 & 1156.

 
Ride Safe,
Fired00d
 

[Cvostu]

I was gonna try these in my sg.  Thinking that they would be used in pace of spot lamps.  They were such a pain in the ass to fit in the stock  lights, I gave up and threw them out.  One was too big and I tried trimming t with a pair of snips.   They sucked for me.   Trash can time. 

[SDCVO]

Oh boy...

[UFO_HOG]

I was gonna try these in my sg.  Thinking that they would be used in pace of spot lamps.  They were such a pain in the ass to fit in the stock  lights, I gave up and threw them out.  One was too big and I tried trimming t with a pair of snips.   They sucked for me.   Trash can time. 

They were a pain to install, but they were not too big or have to be trimmed, you just have to deal with the long wire on them, I just twisted it around till it was tight enough to fit inside the housing, and put the lens on..

[prs4guitars]

Check out Custom Dynamics. They have a number of kits that you can select for front, rear or a combo along with a signal stabilizer. They are very helpful on the phone and also offer a lot of other led options.

[vmatc]

I went with the Dynamic Ringz from Custom Dynamics.  Very easy to install...took about 5 min for the LEDs and another 20 min for the load equalizer.

[SDCVO]

I love the way they look, I will report back after I receive and will report how they installed.

[Twolanerider]

Just an FYI.  What looks to be a comparable light from Ride Time.  Also lifetime warranty at $70 per pair.  I've been using these for a few years now.  Work well.

http://www.ridetimetechnology.com/bullet_lights.htm

[Trimster]

Just an FYI.  What looks to be a comparable light from Ride Time.  Also lifetime warranty at $70 per pair.  I've been using these for a few years now.  Work well.

http://www.ridetimetechnology.com/bullet_lights.htm

Thanks for the link, I'm liking these