Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[SGME9]

I will take a picture and try and post.

[SGME9]

This is with corning lights

[Hx2]

Thanks very much for posting this pic.  I received my passing lights today for my RK but they didn't have the turn Silas attached, so I was wondering how I was going to resolve that. Seeing yours I now know I can use my stock turn signals and just add my new passing lights. Now all I need is my bike....

[jr1000yarder]

I like this set up better for a CVO.  Just looks cleaner to me.

[SGME9]

Everybody has their own setup. I wanted the turn signal in the factory location.

[Uncle Fester]

Thinking about moving the turn sigs on mine to the front forks.

Sent from my iPad using Tapatalk HD

[jr1000yarder]

Thinking about moving the turn sigs on mine to the front forks.

Sent from my iPad using Tapatalk HD

I like that!!!!!!!!!!!!!!!!!!

[SGME9]

I like that also if I wasn't adding the corner lights. I didn't want a big cluster of lights around the headlight.  I like being a little different than the rest.

[Fiberguy]

SGME/JR1000,
The spots make the bikes look completely different.  I'm thinking about getting the clear Ventilator Windscreen, adding the spots, and going towards that traditional Road King look, but the lowers may look odd with all that.  I do like the OEM windscreen for the summer, but as it gets colder, I want something that limits more of the wind.  The OEM is too small.

It is good to know that I'm not the only one that can't just buy something and leave it alone.  Always have to change it. 

[bmcgc]

Thinking about moving the turn sigs on mine to the front forks.

Sent from my iPad using Tapatalk HD

I used that kit on my misses 07 RKC.

What I dont like is the turn signal wire wraps behind the fork on the outside of the nacell and then enters the nacell from the rear.

When sitting on the bike you can see the wire wrapping around the nacell.  It does not look clean at all.

The only way to modify that would be to drill a hole in the nacell behind the turn signal mounting bracket, except the windshield bracket is in the way.

Im stopping by the dealer tomarrow, I will get a pic if her bike hasnt sold.

[Jimonline]

I just added the Arlen Ness Bob Dron sport shield. Modified the brackets to be quick disconnect and just finished an 1 1/2 hour ride in 48 degree weather. The Dron fairing was just the ticket for me. No electric gear but have a Scorpion Hat trick jacket, good gloves and chaps. Going to do it again before it just gets to frigging cold. It will then be muffler coring time using fullsac replacements and also painting the fairing to match when there is less riding time.

BTW, that is a photoshop red fairing, It's still black right now.

[DABB]

THat actually looks pretty good Jim!  Looking forward to seeing the finished product.

[FLSTFI Dave]

Jim, that Sport shield looks pretty good, I like that idea better than a batwing. 

Question on the Ipods that come with these.  Are they still the little square Nano touches or did they go with the new nano touch that is now rectangular now?

[Jimonline]

Square 8gb Nano. i have an itouch that i am using instead. gave the nano to my son. the fairing works really well, I do wish it was a few inches taller but i don't have enough miles on it to know for sure it i want to make the shield taller.

overall i love this the bike. My best ride yet!

[FLSTFI Dave]

Sort of figured they were still using the old out of date square nano touch.  That is what I came with my CVO Road Glide, so I guess I will have two of them now and my 32g touch.

Should be taking delivery of my King Nov 7th or so.