Topic: Purchased a 2013 Atomic Orange this afternoon (With Pics) (Read 179228 times)

spydglide · « **Reply #525 on:** January 26, 2014, 07:49:34 AM »

Very nice. Love the color-matched pin-striping on the bars. spyder

YELLOWBIRD · « **Reply #526 on:** January 26, 2014, 08:03:54 AM »

Quote from: Jswerve on January 26, 2014, 06:25:56 AM

Love love love it. I just mocked up some 13" apes and I was thinking man these would have looked cool as hell painted to match the bike $:-\$

Yep, COLOR BARS Are the new thing!!! Would look good on your bike.

I did mime back in November, and many of folks have inquired bout my bars! What brand, etc..

I say go for it Jswerve they will look sharp and different then others.

YB

YELLOWBIRD · « **Reply #527 on:** January 26, 2014, 08:06:13 AM »

Quote from: Puzzled on January 25, 2014, 09:44:32 PM

Stock black bars with a splash of color.

Looking good!

YB

Puzzled · « **Reply #528 on:** January 31, 2014, 06:36:22 AM »

Pulled in the driveway after work and this was waiting for me! 26" version of the Agitator.

Puzzled · « **Reply #529 on:** January 31, 2014, 06:37:07 AM »

Had to take it out of the box and roll it under the bike...

Puzzled · « **Reply #530 on:** January 31, 2014, 06:38:41 AM »

Generic glass fender. Very few actually sit level....

The cord I use to set my fender/tire clearance.

Setting my rear fender height at 3 1/2".

Puzzled · « **Reply #531 on:** January 31, 2014, 06:39:57 AM »

Marking my cut lines.

A measurement for where my graphics are to start.

First round of cut lines. Now to transfer them to the other side.

Puzzled · « **Reply #532 on:** January 31, 2014, 06:41:13 AM »

Clearance with the front air all the way down. This will be as close as the limiters let me go.. I hope...

Puzzled · « **Reply #533 on:** January 31, 2014, 06:42:37 AM »

All cut out....

I wanted/needed to keep the FL style top of the fender so my graphics have some place to go.... the bottom has the FL straight down back and wrap style front to show more of the wheel.

Puzzled · « **Reply #534 on:** January 31, 2014, 06:44:21 AM »

Bars installed. I like they way look painted.

Puzzled · « **Reply #535 on:** January 31, 2014, 06:47:44 AM »

Cutting a second hole to add another switch for the front air ride.

Puzzled · « **Reply #536 on:** January 31, 2014, 06:51:32 AM »

Gauge cluster to fairing clearance. Gained a bunch with the 40* rake.

Puzzled · « **Reply #537 on:** January 31, 2014, 06:53:45 AM »

Shocks installed.

Jswerve · « **Reply #538 on:** January 31, 2014, 07:31:24 AM »

Hell yeah!

rcamp2009 · « **Reply #539 on:** January 31, 2014, 09:32:19 AM »

Amazing! Like my Grandpa used to say. That feller is a hard cat to clean up after. Can't wait to see finished project.

Author Topic: Purchased a 2013 Atomic Orange this afternoon (With Pics) (Read 179228 times)

spydglide

Re: Purchased a 2013 Atomic Orange this afternoon (With Pics)

YELLOWBIRD

Re: Purchased a 2013 Atomic Orange this afternoon (With Pics)

YELLOWBIRD

Re: Purchased a 2013 Atomic Orange this afternoon (With Pics)

Puzzled

Re: Purchased a 2013 Atomic Orange this afternoon (With Pics)

Puzzled

Re: Purchased a 2013 Atomic Orange this afternoon (With Pics)

Puzzled

Re: Purchased a 2013 Atomic Orange this afternoon (With Pics)

Puzzled

Re: Purchased a 2013 Atomic Orange this afternoon (With Pics)

Puzzled

Re: Purchased a 2013 Atomic Orange this afternoon (With Pics)

Puzzled

Re: Purchased a 2013 Atomic Orange this afternoon (With Pics)

Puzzled

Re: Purchased a 2013 Atomic Orange this afternoon (With Pics)

Puzzled

Re: Purchased a 2013 Atomic Orange this afternoon (With Pics)

Puzzled

Re: Purchased a 2013 Atomic Orange this afternoon (With Pics)

Puzzled

Re: Purchased a 2013 Atomic Orange this afternoon (With Pics)

Jswerve

Re: Purchased a 2013 Atomic Orange this afternoon (With Pics)

rcamp2009

Re: Purchased a 2013 Atomic Orange this afternoon (With Pics)