Hey all,
Getting prepared for my 50K service (actually bike has 55K but had an off frame rebuild back in late 2004).
I usually bring the bike in every other year to have the dealer do the 10K service (I do the 5K, air filter, plugs, and all fluid changes).
Steering head and swing arm are ok and I will wait until they actually need replacement since you need to disassemble them to check them.
I had major engine work done in late 2008 only for replacing the chain cam to gear cams (got rid of the cam tensioners, new crank, backplate, rebuilt fueling Oil pump, timken bearing etc).
Last HD service was 2/2010 40K.
Questions
Fuel filter - had it changed in 2009 at 38K, anyone suggest changing it now or wait until the 25K interval (I have the kit already)?
Front fork fluid change - service is suggested at 25K and 50K (running progressive springs).
Bleeding brakes/clutch - service suggest to inspect at 5K intervals.
Zipper’s Tapered Adjustable Pushrod #403-088 - previous tech suggested just checking for play when cylinder is at TDC and try to spin the PR.
Suggestions appreciated.
Thanks!