www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Recommend Upgrades to SERG 95"  (Read 1132 times)

0 Members and 1 Guest are viewing this topic.

Eric Sommer

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
  • FLHRSEI.ORG
Recommend Upgrades to SERG 95"
« on: October 01, 2006, 06:46:32 PM »
I'm asking a question that probably has benn asked a hundred times before , but can anyone help out.
I have a '01 SERG with the stock 95 and want to build it up some more. I'm soon going to install a SE Racetuner and have Vance and Hines mufflers. I want to install a true dual exhaust and a high flow air cleaner.
What would be some recommendations on heads, cams, and intake.
I've got a friend that just installed a 95" into his dyna and is running his mouth and I need to shut him up without going to a larger displacement.
Logged

nidan

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1416
  • Keep the breeze between your knees

    • CVO1: 02 FWDWG3 Stage IV 95 -sold
Re: Recommend Upgrades to SERG 95"
« Reply #1 on: October 02, 2006, 07:56:16 PM »
I would suggest a higher lift cam, gear driven if you can swing it, then headwork to match. Right now you are probably running in the mid to upper 70's at the rear wheel, 100/100 is withing reach with the right combo.  I'm at 98/101 and love it.
Logged
CVO -'02 FWDWG3 Stage IV 95 -sold
'07 FLHX Stage II 103 95hp/111lbs ft
'09 FJR 1300- 145hp /99 lbs ft
2011 Mustang GT 412hp/390 lbs ft

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6710

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: Recommend Upgrades to SERG 95"
« Reply #2 on: October 03, 2006, 07:04:10 PM »
I need to make an addendum to this i read it it just didnt register you said without going to larger displacement.

Actually I would suggest something like a 107 kit .. bigger juggs / pistons and cam.
There are many of these types of combinations out there it just takes a little money :)

I would definately suggest as a starting point to give zippers a call and talk to them about the 107 kit / or other mods to your 95 than you will have a good idea of what is possible and the associated costs.

Your bottom end could stay the same and you could pickup quite a bit of power.
« Last Edit: October 03, 2006, 07:18:10 PM by Unbalanced »
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

Eric Sommer

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
  • FLHRSEI.ORG
Re: Recommend Upgrades to SERG 95"
« Reply #3 on: October 07, 2006, 05:06:53 PM »
Right now I'm running 75 hp and 83 ft lbs torque without a tuner and running rich at 3400 rpm.
How much lift are the heads and pistons good for in the clearance department?

Thanks for the replies.
Logged

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6710

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: Recommend Upgrades to SERG 95"
« Reply #4 on: October 09, 2006, 12:53:36 AM »
I would guess, but that is not going to help you.  Ask the guys in the RoadGlide forums I am sure someone has a spec book for that Glide.
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

SOKOOLJ

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 903
  • FLHRSEI.ORG

    • CVO1: FLHRSE3
Re: Recommend Upgrades to SERG 95"
« Reply #5 on: October 09, 2006, 01:35:25 PM »
After reading UnBaLaNcEd reply#2, I just want to go spend some $$$. This is why I come to this site...adreneline pump!!!
As soon as the systems for the 07's are out and tested I'll be opening the check book.

Love you guys/gals!

SOKOOL
Logged
 

Page created in 0.236 seconds with 21 queries.