Topic: Would the TTS cables work with HD race tuner? (Read 794 times)

Cvostu · « **on:** August 10, 2013, 07:54:06 AM »

Good friend of mine bought a 2010 sesg. Has the tuner but no cables. Wanted to adjust the idle. Gonna go for some pipes soon,, Says the idle is set way too high. It came from a high altitude area. We are in fl. Thanks.

hrdtail78 · « **Reply #1 on:** August 10, 2013, 10:21:46 AM »

Yes, they will work.

skratch · « **Reply #2 on:** August 10, 2013, 11:23:25 AM »

just don't try to set the idle too low in an attempt to get that 'potato, potato' sound. if you go much below 1000 rpm, you will oil starve the engine, and not be a happy camper

FLTRI · « **Reply #3 on:** August 10, 2013, 12:30:47 PM »

If the cables attach then they will work. Computer side is a printer cable available virtually anywhere cables are sold.
The bike side must have the proper end for plugging into the data port. This cable is avail from TTS or HD.

That said, we have a few customers in Japan that ask us to provide tunes with the idle rpms set to 600 rpms.
After advising against it we did it...that was 3+ years ago and they have yet to have an issue.
We still do not recommend as the charging system doesn't charge below about 900 rpms.

Bob

Cvostu · « **Reply #4 on:** August 10, 2013, 03:43:07 PM »

Thanks for the replies. The idle was fine. He was nervous about the clunk the trans made when dropping it into first gear. Needs some good lubricant in there and then he can see how it improves.

Author Topic: Would the TTS cables work with HD race tuner? (Read 794 times)

Cvostu

Would the TTS cables work with HD race tuner?

hrdtail78

Re: Would the TTS cables work with HD race tuner?

skratch

Re: Would the TTS cables work with HD race tuner?

FLTRI

Re: Would the TTS cables work with HD race tuner?

Cvostu

Re: Would the TTS cables work with HD race tuner?