Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Yellow09SERG]

I'll give ya 5 grand for that "new pipe" if it works that well on my bike!

X2 on that new pipe. Hope that new pipe come with all the extra parts.....lol

[Unbalanced]

Maybe Stu will get an invite to the HBRR club if he goes down an plays with Harry Good luck Stu, ol Harry might have some tricks up his sleeve. We will all be waiting for the report.

Terry,

No tricks with this motor, just have to be able to hang on.   

[Unbalanced]

I'll give ya 5 grand for that "new pipe" if it works that well on my bike!

Pipe was under a grand, Drago 2 into 1 with the 2.55 baffle.   Frank wasn't sure if it would support this build, so it was a shot in the dark.   Thankfully it worked pretty well and I was able to keep my hearing the 3.05 baffle was too loud on my 11 SESG and I couldnt bring myself to put it on this bike even if it would have boosted the power, just wasnt worth it at the time.

x3 on the 5 grand if it were only that easy.   5 grand is a great start, but that's all it is a start.   

[deldago]

Pipe was under a grand, Drago 2 into 1 with the 2.55 baffle.   Frank wasn't sure if it would support this build, so it was a shot in the dark.   Thankfully it worked pretty well and I was able to keep my hearing the 3.05 baffle was too loud on my 11 SESG and I couldnt bring myself to put it on this bike even if it would have boosted the power, just wasnt worth it at the time.

x3 on the 5 grand if it were only that easy.   5 grand is a great start, but that's all it is a start.

It struck me as funny that the only description on the sheet was "new pipe" with those #'s. Boy do I wish it was that easy, maybe start with a Hyabusa engine first? I applaud you on your use of discretionary income, I would carry that dyno sheet in my wallet next to the pictures of my family!

[Yellow09SERG]

Pipe was under a grand, Drago 2 into 1 with the 2.55 baffle.   Frank wasn't sure if it would support this build, so it was a shot in the dark.   Thankfully it worked pretty well and I was able to keep my hearing the 3.05 baffle was too loud on my 11 SESG and I couldnt bring myself to put it on this bike even if it would have boosted the power, just wasnt worth it at the time.

Unbalanced, how is the volume level with the 2.55 baffle? I am leaning that way on a 113 build with the 24 cam, just not sure where to go on the baffle. 2.55 or the 2.3 baffle

[Jswerve]

Pipe was under a grand, Drago 2 into 1 with the 2.55 baffle.   Frank wasn't sure if it would support this build, so it was a shot in the dark.   Thankfully it worked pretty well and I was able to keep my hearing the 3.05 baffle was too loud on my 11 SESG and I couldnt bring myself to put it on this bike even if it would have boosted the power, just wasnt worth it at the time.

Unbalanced, how is the volume level with the 2.55 baffle? I am leaning that way on a 113 build with the 24 cam, just not sure where to go on the baffle. 2.55 or the 2.3 baffle

So far I find it even quieter then my D&D fatcat was with quiet baffle. I am actually a bit disappointed lol.

[Unbalanced]

3.05 was borzilla loud, 2.55 is like the borzilla quiet baffle to me tolerable yet will bark when u get on it

[Jswerve]

3.05 was borzilla loud, 2.55 is like the borzilla quiet baffle to me tolerable yet will bark when u get on it

I'll let ya know this weekend. Heading to Drago's bikeworks tomorrow to pick my baby up. Just had S & S premium lifters and push rods installed along with a Dragula 2-1 and Frank's Drago 580 cam. Can't wait to see the results. I was going to do the Kury but changed my mind at the last minute. They are very similar any way.

[Fatboy]

I'll let ya know this weekend. Heading to Drago's bikeworks tomorrow to pick my baby up. Just had S & S premium lifters and push rods installed along with a Dragula 2-1 and Frank's Drago 580 cam. Can't wait to see the results. I was going to do the Kury but changed my mind at the last minute. They are very similar any way.

J,

 With all that new found power "Swerve-ing" will be out and we'll have to rename you "JStraight" !

  Enjoy!

Fatboy

[Jswerve]

J,

 With all that new found power "Swerve-ing" will be out and we'll have to rename you "JStraight" !

  Enjoy!

Fatboy

        

[Yellow09SERG]

Thank you Unbalanced.

J
What baffle are you planning on running with Franks cam?

[Jswerve]

Thank you Unbalanced.

J
What baffle are you planning on running with Franks cam?

2.55

[Yellow09SERG]

Be very interested to see how it turns out for you. The cam Frank has out should work very well. I am going to stick with the 24d being it is already laying in there on my toolbox. Hopefully I can get heads sent out in the next few weeks.

[Jswerve]

Be very interested to see how it turns out for you. The cam Frank has out should work very well. I am going to stick with the 24d being it is already laying in there on my toolbox. Hopefully I can get heads sent out in the next few weeks.

I will post the dyno sheet when I can

Sent from my SCH-R970 using Tapatalk

[FlaHeatWave]

Be very interested to see how it turns out for you. The cam Frank has out should work very well. I am going to stick with the 24d being it is already laying in there on my toolbox. Hopefully I can get heads sent out in the next few weeks.

David, 'just happened back on this thread and see that you're going with the 24s.

I'm sure that you will like them a lot more than SEs that you have now. Don't you know that you are supposed to get this motor work done while the white stuff is still on the ground  lol

What Displacement and Compression are you planning to run?

Have you had a chance to put any miles on the DD7 yet?

Good Luck, and let us know how your Build progresses

Ed