www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: fullsac cores?  (Read 2065 times)

0 Members and 1 Guest are viewing this topic.

fkjunkin

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 59
fullsac cores?
« on: February 11, 2014, 09:01:23 AM »
Have searched for this so if I missed it sorry.
Have 2 in cores installed on 2011 cvo road glide, have done a little work on engine, cams, heads, 113",  and a few others. @ 115/121 now.
Question is would the 2" cores still be the best performing  choice?
Logged

Fullsac Performance

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1768
  • Never ride with a Halfsac! Insist on Fullsac Perf!
    • AZ


    • CVO1: 2024 Road Glide
    • Fullsac Performance
Re: fullsac cores?
« Reply #1 on: February 11, 2014, 02:25:02 PM »
Quote from: fkjunkin on February 11, 2014, 09:01:23 AM
Have searched for this so if I missed it sorry.
Have 2 in cores installed on 2011 cvo road glide, have done a little work on engine, cams, heads, 113",  and a few others. @ 115/121 now.
Question is would the 2" cores still be the best performing  choice?

At that power level the 2.25 core would likely show a small increase in peak TQ and HP.
Attached is a before and after dyno chart from a 2011 CVO110 with 259 cams and a 58 TB I tuned up last week after swapping to a DX Pipe and 2.25 cores.
Bike came in with TDs and HI outputs. Ended up running pretty stout at 118 and 124!

SG
Logged
Never argue with idiots. They will beat you with experience.

Foot Loose

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 158
Re: fullsac cores?
« Reply #2 on: February 12, 2014, 08:21:54 PM »
does anybody make cores for the 2014 softail deluxe?
Logged
I'd rather push a Harley, than ride a Honda

dartman

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 940
Re: fullsac cores?
« Reply #3 on: February 13, 2014, 10:29:29 PM »
Cycle Shack makes replacement baffles for Soft Tails, should work on the Deluxe shotgun pipes as well
« Last Edit: February 14, 2014, 12:17:22 PM by dartman »
Logged

Foot Loose

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 158
Re: fullsac cores?
« Reply #4 on: February 17, 2014, 10:07:07 AM »
Ok thanks Dartman, I'll check them out!
Logged
I'd rather push a Harley, than ride a Honda

dartman

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 940
Re: fullsac cores?
« Reply #5 on: February 17, 2014, 02:14:21 PM »
Footloose, I gave you some bad information, the baffles I replaced were on the Screamin Eagle Street performance mufflers for a 2013 Deluxe they would not fit your stockers, Sorry
Logged

Foot Loose

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 158
Re: fullsac cores?
« Reply #6 on: May 05, 2014, 08:39:10 PM »
I ordered cores from fullsac and welded them onto the ends of the original baffles.  All set and tuned.  :)
Logged
I'd rather push a Harley, than ride a Honda
 

Page created in 0.219 seconds with 21 queries.