www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: How do I take a gauge apart to change a cracked lens?  (Read 2264 times)

0 Members and 1 Guest are viewing this topic.

Puzzled

  • Vendor
  • 5k CVO Member
  • *
  • Offline Offline
  • Posts: 8801
    • PA


    • CVO1: 2018 FLTRXSE Road Glide Custom (SOLD)
    • CVO2: 2013 FLTRXSE2 Road Glide Custom (SOLD)
    • CVO3: 2001 FLTRSEI2 Road Glide (SOLD)
How do I take a gauge apart to change a cracked lens?
« on: February 11, 2014, 03:24:56 PM »
How do I take a gauge apart to change a cracked lens?

I see companies on the net offering to change gauge faces so I am under the impression they pull the glass off to do so.

I'd like to be able to take one apart.....

I will have to look to see if I have an old gauge....
Logged
2023 CVO Road Glide
2003 Rigid Springer Chopper "Puzzle" Bike 26"

deldago

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 640
    • OH


    • CVO1: 2013 FLTRXSE2
Re: How do I take a gauge apart to change a cracked lens?
« Reply #1 on: February 11, 2014, 04:22:24 PM »
The only way I was able to do an old speedometer was to take a thin blade screwdriver and pry up the chrome retaining ring a little all the way around the gauge to get enough room to remove it.It will leave some tooling marks on the ring when bent back tight but they couldn't be seen once the speedo was but back in the dash. Check YouTube,there are several videos.
Logged
T-MAN 117 kit

dlaws01

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1502
  • Rejoicing in hope, patient in tribulltion

    • CVO1: 105th Anniversary FXSTSSE2
Re: How do I take a gauge apart to change a cracked lens?
« Reply #2 on: February 11, 2014, 05:13:06 PM »
Very carefully and without much force.  :oops:
Logged
Jesus is Lord

cahdbiker

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 932

    • CVO1: FLHTCUSE4
Re: How do I take a gauge apart to change a cracked lens?
« Reply #3 on: February 16, 2014, 01:59:04 AM »
Puzzled, there is a place I use for gauge repair called North Hollywood Speedometer & Clock Co. 6111 Lankershim Blvd. North Hollywood Ca. 818-761-5136.  I broke the lens on my 95 Heritage Speedo and they fixed it for about $60.00. I sent it over UPS and they sent it back to me in about a week. CAHDBIKER 
Logged

2009 SEUC just south of Point Mugu Ventura County, Ca.

aclass

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 780

    • CVO1: FLTRSE3
Re: How do I take a gauge apart to change a cracked lens?
« Reply #4 on: February 16, 2014, 09:18:55 AM »
Hey Puzzled,   I accidentally disassembled one by over tightening in my fairing.  POP!   the chrome bezel and glass flew across the bike.
I took it to a Mennonite glass cutter who cut me another glass and then took two wood clamps and carefully pressed the chrome bezel back on.  Quite frankly, I got lucky!  But if your gauge is the same as the Harley oil temp gauge,  the bezel presses on over a lip to hold everything together.

good luck
Logged
 

Page created in 0.219 seconds with 21 queries.