Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[BLM777]

I've always preferred measuring those temps manually...

I've noticed a big difference on my right leg, back of the thigh heat sensor since installing the TD RH's, and not a corresponding increase on the left...I'm sure that there is more heat ON the left side now, but my left leg does not feel any more than when the crossover was there.

[ESJ JESTER]

a bunch of old guys from montana still singin after 40 yrs   saw em last year actually its Bareback at big sky

[Midnight Rider]

Sure hope you're not working today TC....heard it was going to hit the low 70's in Guntersville today.

[BLM777]

Brian, sometimes technology truly is a wonderful thing.

Nope, technology or your idea turned out to be counterproductive.  I got a negative reading on the meter when my bride asked what I was doing with "that gadget" at the lunch table.....

[BLM777]

a bunch of old guys from montana still singin after 40 yrs

[Twolanerider]

Nope, technology or your idea turned out to be counterproductive.

[BLM777]

Brian, like all new technologies introduction is crucial.

[Twolanerider]

Probably is Don....I try again in about a month.......

oh, you poor man    

[smiley=huepfenlol2.gif] [smiley=drink.gif]

[Fired00d]

The really good ones that measure within a 1/2 degree of accuracy down low also can also be a lot of fun pointing at different places on a young lady's........ um......; never mind.

You mean you don't use the "checking to see if pasta is done technique"?? [smiley=nixweiss.gif] [smiley=huepfenlol2.gif]

 [smiley=pumpkin.gif]
Ride Safe,
Fired00d
 [smiley=fireman.gif]

[Twolanerider]

You mean you don't use the "checking to see if pasta is done technique"?? [smiley=nixweiss.gif] [smiley=huepfenlol2.gif]

 [smiley=pumpkin.gif]
Ride Safe,
Fired00d
 [smiley=fireman.gif]

heat gun, pasta; yeah, used them both

[Fired00d]

heat gun, pasta; yeah, used them both

[smiley=xyxthumbs.gif] [smiley=huepfenlol2.gif]

 [smiley=pumpkin.gif]
Ride Safe,
Fired00d
 [smiley=fireman.gif]

[Twolanerider]

[smiley=xyxthumbs.gif] [smiley=huepfenlol2.gif]

 [smiley=pumpkin.gif]
Ride Safe,
Fired00d
 [smiley=fireman.gif]

but not at the same time (at least that I can remember)  [smiley=drink.gif]

[HUBBARD]

Just to throw in some Hillbilly Engineering, the most economical, and practical performance enhancement for a stock engine, whether it be 88, 95, 103, or 110 cu. in., is SE, or Super-Trapp slip-ons, and a Bow-Tie small block freeze plug inserted in the left curvature of the of the Y-pipe, with a 5/32 hole drilled in the middle of it.  You keep the Duals, but you have a 2 into 1 exhaust, with minimal expense.  There endeth the lesson.  Later--HUBBARD    

[Hoist!]

Just to throw in some Hillbilly Engineering, the most economical, and practical performance enhancement for a stock engine, whether it be 88, 95, 103, or 110 cu. in., is SE, or Super-Trapp slip-ons, and a Bow-Tie small block freeze plug inserted in the left curvature of the of the Y-pipe, with a 5/32 hole drilled in the middle of it.

[Midnight Rider]

But if you look real close at Maudie, she's got black tips

And it's a stock   bike, too....