Is there a Calibration in the TTS system for a 120R transplant into a 2011 Streetglide ( non CVO sorry )
Reason I ask is my friend's 2011 Streetglide was on a TTS 103 calibration prior to the engine swap
The 120R kit came with a new Orange Supertuner of course , but it won't connect to the bike's ECM
It will read the VIN but no more , the bike is currently "locked" to the TTS system
And of course either we had not saved the stock cal at the first TTS download , or it was lost in the death of a laptop ( most likely !). It was nearly 4 years ago and we can't actually remember truth be told
The bike had several metamorphoses before the 120R , 255 cams / true dual headpipes etc etc so had been TTS'sd several times and must have been reflashed after the time of the "TTS Lock "
What I have done in the short term is bump up the cubes to 120 in a "1856 Super high output " CVO calibration and the bike seems to run well enough. Same throttle body and compression ratio , and same or similar heads from what I can gather.
Cal ID is FUF-009-01
If there is a 120R cal anywhere in the TTS catalogue then sorry I can't find it
Thanks in advance from Perth Western Australia folks !!