Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Hoist!]

Thanks for the report and pictures Reo.

[JR]

Don, are you saying you had the Honda shop pull the wheels off your bike and do the tire swap or did you pull the wheels?

Either way thats a h_ll of a price. I pulled my wheels and had a local old school chopper shop do the tire swap/ballance $60. I had the local Honda shop do a tire swap on my BMW last year but was leary having them mess with my detonator's. I payed about $225 for the tires, note that 160 is a little more than the MU90. I never checked prices at the local Honda dealer here but from my experience they dont have prices here like you experienced.

Excellent write up and photo's Roy! [smiley=xyxthumbs.gif]

I experienced the same with my rear tire. After I got home from MV I couldn't believe how much wear it had from the 2000+ miles I put on. I didn't push the 100 mark coming home but I did try to keep up with 103T all week! I wasn't going to push it to the 10,000 mark, so after seeing 2lanes elite 3 at MV I decided to give them baby's a shot.

When I was researching the elite 3 tires and I found them the cheapest going thru motoXoutlet.

MT90B16-Front $85.99
MU90B16-Rear  $96.99
Shipping    $25.00

Total  $207.98
  
Here is the hot link http://www.motoxoutlet.com/index.asp?PageAction=CARTDETAILS

I too am very pleased with the feel of these tires. I hope I can get the life I did out of my stock Dunlops minus the rear tire from MV trip!

Hey Roy, whattaya mean too cold to clean the bike??? [smiley=nixweiss.gif] That morning we left out of MV wasn't too cold....once my heated seat melted the frost off my seat! [smiley=nervous.gif] Ya need to come down to Memphis this weekend, 70+ degrees and bring these babys  8-). Merry Christmas Buddy and God Bless!

                                                                                JR [smiley=banana.gif]

[JR]

By the way, Tires were shipped right away, no delay from strike. And here is another link to the Elite 3 bias tires for touring.

http://www.motoxoutlet.com/index.asp?PageAction=VIEWPROD&ProdID=975

The other link showed my cart and shipping of $25 expired. Later!

                                                                     JR [smiley=banana.gif]

[110tHunDer]

They did the whole thing Roy.

[reo]

Hey Roy, whattaya mean too cold to clean the bike??? [smiley=nixweiss.gif] That morning we left out of MV wasn't too cold....once my heated seat melted the frost off my seat! [smiley=nervous.gif] Ya need to come down to Memphis this weekend, 70+ degrees and bring these babys

[amigo Jorge]

I have been using the rear Dunlop/Elite 3 for the last 4000 miles and they are great.... [smiley=xyxthumbs.gif]

Jorge

[Twolanerider]

Did he change the gear oil in the shaft drive while he was at it? [smiley=huepfenlol2.gif]

I wasn't at all worried about that install Brian.  At least not until the kid in the stall next to my bike grabbed a drive shaft and started looking for a place to mount it.  He gave up when he couldn't wrap the drive belt it around it like a torsion sping and make the whole thing spin when it was released.

[jfh]

I think some of the original information posted by Reo was lost in the transition to the new website.  I PM'd him for additional details which I share below for others that are still considering the E3 switch. I think I have been convinced to give them a try.

"The 160 was an elite III and it fit perfectly with about an 1/8" clearance from the plastic belt guard. I haven't felt any rubbing from the diameter change but I haven't taken it all the way up yet. I have to tell you I did quite a bit of measuring before ordering and it fit on my bike but I wouldn't count on it fitting every EG without maybe a spacer mod.

Yes I put the tire on the stock detonator, and I might point out Dunlop doesn't condome this tire on a 3" rim. It looks good in there and the tread not quite as nice as the Metzler or even the 150 sreamin eagle tire on my FatBoy but it looks much better than the stock one. I really liked the load rating being higher than the stock tire and much higher then the Metz. The Elite III tires have a skinny profile even the front tire is a little narrower so you loose a little width in the front.

I like the ride and handling so far with a little less than 1k so far (salt on the roads here). I'm not sure I would be a fair judge going from worn out hard stock 402's to the Elite III's, but I'm very impressed so far. Another by product of the switch for me was the speedo was 2-4mph off depending on the speed (I'm comparing this to my gps) and now its just about dead nut.

I would have to say the Elite III's with the 160 on the back seem like they were made for my bike.

One thing I forgot to point out: the Elite III's are narrower than published. I didn't measure them but my assumpsion is they are slightly taller than published. In fact my measurements before taking delivery of the tires confirmed I was going to remove or modify the belt guard but the tires are maybe 3/8" narrower than I was expecting. I know I used the 160 on a 3" rim but the front tire is narrower than published also. The profile of the front could be wider, I really would like a larger front tire to fill the fender but they don't make a larger one in the Elite III series. Actually the biggest reason for me going to these tires is the load rating. I literally burnt the stock back tire off my seeg comming back from M/V loaded up 100mph 9 1/2 hrs to Chi-town."

[jeffj]

I just decided to get a pair of the Elite 3's and give them a try this Spring


jeffj