Topic: Need a 13 or 14 CVO for testing a new clutch item (Read 1746 times)

GMR-PERFORMANCE · « **on:** July 31, 2014, 09:22:08 AM »

We have a item that will bolt on top of the CVO A&S slipper clutch. In some case we may even be able to lower the spring rate. Based on build of course. No other mods can be installed through the derby cover. If you are in the DFW area please get in touch with us. Testing will be in house only I need the bike for less than an hour.

sinner · « **Reply #1 on:** July 31, 2014, 02:04:37 PM »

What's the point of the mod? I have a 14 cvo breakout that may need your attention on tuning... It's back at the dealer now.

GMR-PERFORMANCE · « **Reply #2 on:** July 31, 2014, 02:12:21 PM »

It will only work on the A&S clutch and I thought that it was on the bagger only.. I could be wrong .. Let me know what version you have. If it is the correct version Great. The item is a lock up hat that will increase the pressure on the pack . SUPER simple install

Steve Cole · « **Reply #3 on:** July 31, 2014, 03:15:01 PM »

A&S is only on CVO models with hydraulic clutch

GMR-PERFORMANCE · « **Reply #4 on:** July 31, 2014, 03:15:48 PM »

That's what I thought

Author Topic: Need a 13 or 14 CVO for testing a new clutch item (Read 1746 times)

GMR-PERFORMANCE

Need a 13 or 14 CVO for testing a new clutch item

sinner

Re: Need a 13 or 14 CVO for testing a new clutch item

GMR-PERFORMANCE

Re: Need a 13 or 14 CVO for testing a new clutch item

Steve Cole

Re: Need a 13 or 14 CVO for testing a new clutch item

GMR-PERFORMANCE

Re: Need a 13 or 14 CVO for testing a new clutch item