Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[SE-Mike]

I had the same problem with the lighting on mine as well. After a couple phone calls and emails they sent out a whole new license plate frame unit. 

[JustDennis]

I had the same problem with the lighting on mine as well. After a couple phone calls and emails they sent out a whole new license plate frame unit. 

Same for me and the replacement has super bright LEDs.


Sent from my iPhone using Tapatalk

[Jswerve]

I had the same problem with the lighting on mine as well. After a couple phone calls and emails they sent out a whole new license plate frame unit. 

I'm not getting the same treatment. I was told mine was too old. Exact words "Under the dynamic vibration and weather conditions those are exposed to? We are really happy with the reliability of that product. If I had the light I would send you a replacement. Again, changed that light set up to get a brighter fuller light spray. Yes, you can buy a new model, go with one light, or try to find a single LED bulb and rig it. "

In other words, kick rocks.

[CVODON]

I got some replacement LED's from Radiantz awhile back. They came in a strip, you could cut at any length you wanted then connect with a drop of solder. Very easy, the Radiantz are aLOT brighter than the ones I replaced. I explained they went in a license frame.

[Jswerve]

I got some replacement LED's from Radiantz awhile back. They came in a strip, you could cut at any length you wanted then connect with a drop of solder. Very easy, the Radiantz are aLOT brighter than the ones I replaced. I explained they went in a license frame.

Thanks Don I'll give 'em a holler

[2018_FLTRXSE]

Mine did this a while back.... no fix from Yaffe as mine was over 12 months old as well.

They suck... I have one working LED left.

[Jswerve]

Mine did this a while back.... no fix from Yaffe as mine was over 12 months old as well.

They suck... I have one working LED left.

Yes sir. That's obviously why they changed to an LED strip vs. the 2 individual lights. They are aware of the problem it's just too bad they aren't honoring all inquiries.

[Fired00d]

Yes sir. That's obviously why they changed to an LED strip vs. the 2 individual lights. They are aware of the problem it's just too bad they aren't honoring all inquiries.

Sounds like a play out of the MoCo playbook... realize they have an inferior product  then (try to as the MoCo does) improve/fix it and not take care of those that have the inferior product.

 
Ride Safe,
Fired00d
 

[Jswerve]

Sounds like a play out of the MoCo playbook... realize they have an inferior product  then (try to as the MoCo does) improve/fix it and not take care of those that have the inferior product.

 
Ride Safe,
Fired00d
 

DooD my thoughts exactly. Unfortunately it felt all too much like home...

[Jswerve]

Update:

Got the new Stealth in and installed. New lights wouldn't turned on. Turns out the 2 wires were reversed. I had to take apart the Duetsch connector and swap the wires. Lit up after that. You would think they would test them prior to shipping. Only 2 wires, you had one job, one job! 

[phato1]

One job is to much for some folks to handle........

Glad you got it sorted.

[Jswerve]

One job is to much for some folks to handle........

Glad you got it sorted.

Thanks 

[T-Roy]

Update:

Got the new Stealth in and installed. New lights wouldn't turned on. Turns out the 2 wires were reversed. I had to take apart the Duetsch connector and swap the wires. Lit up after that. You would think they would test them prior to shipping. Only 2 wires, you had one job, one job! 

I installed my replacement Stealth this morning also. I had to take the connector apart and swap the wires also.

[Jswerve]

I installed my replacement Stealth this morning also. I had to take the connector apart and swap the wires also.

Wow.